PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

10 replies [Last post]
Offline
Joined: Apr 8 2014
Posts: 23

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
Offline
Joined: Oct 9 2011
Posts: 1045
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

From the pics on eBay. They don't look like the correct caps.

Offline
Joined: Apr 8 2014
Posts: 23
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

I thought the correct ones where the Phillips 22uf 25v 4.5mm x 10.5mm axial.. do you have the correct make/model info? Thanks!

Offline
Joined: Oct 9 2011
Posts: 1045
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

I don't recall the exact part number. It's not just size and manufacturer, but package and series you need. I think the last set I got was from a surplus place I went in person, but I had an original cap that was damaged from an Apple-1 with me to make sure it was the same.

There are modern ones that look pretty close and would be safer to use. I may have that part number also from an old mouser order. They aren't exact but they are close. I can look tomorrow.

Cheers,
Corey

Offline
Joined: Dec 13 2013
Posts: 18
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

Well, I made the mistake of purchasing this item thinking that they were correct for my Apple 1 replica. They were all bad, a few were open and the best were only about 10uf with very high ESR. They must be very old stock. Don't waste your money.

Dick Stachowiak
East Syracuse, NY

__________________

Dick Stachowiak
East Syracuse, NY

Offline
Joined: Apr 8 2014
Posts: 23
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM
Offline
Joined: Jun 5 2008
Posts: 380
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

Those are widely available - if you just want a part of the correct value, fit and the approximate color:

Vishay part number:MAL202138229E3

http://www.digikey.com/product-search/en?pv7=2&k=4068PHCT-ND&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

regards,
Mike W.

Offline
Joined: Nov 27 2013
Posts: 13
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM
Offline
Joined: Jan 1 2015
Posts: 47
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

What are the correct dimensions for the original small blue 22uf caps?

len

Offline
Joined: Jun 5 2008
Posts: 380
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

I suppose someone might have the official Philips data sheet, but I measure them as approximately 11mm x 6mm

Offline
Joined: Jan 1 2015
Posts: 47
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

Thanks Mike,

I thought the 4.5mm looked a bit small in dia, but pretty close on the width.