Twinkle Twinkle Little Star for the Apple I ACI output

Hook up a +40-60db microphone pre-amp to your stereo (If your TV you are using as a monitor has a good amp built in you may hear something on max volume) or use a bass guitar or PA amp like I am, though I tested my DYNEX 15" TV on max volume and can hear it.

Then type attached basic program....

or load the wav file after loading basic

C100R
4A.00FFR 800.FFFR
/
E2B3
RUN

AttachmentSize
TwinkleTwinkle.txt2.73 KB
Twinkle Twinkle LittleStar.wav7.27 MB

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Re: Twinkle Twinkle Little Star for the Apple I ACI output

One thing I should say...

There is someone I have to credit for the chart of C1 at 255 to calibrate my notes on the 6502. The problem is I don't have a name, it was from an old Xerox page shoved in a book...

So thank you to someone out there. You saved me a lot of work using an electronic guitar tuner and a lot of trial and error. Trust me I started this project that way until I remember the chart and tracked it down.