Emac Logic Board Swap from 1.25 to 1.0Gig

4 posts / 0 new
Log in or register to post comments
Last post
January 31, 2007 - 10:53am
#1
swizler
Offline
Last seen: 17 years 2 months ago
Joined: Jan 31 2007 - 10:36
Posts: 3
Emac Logic Board Swap from 1.25 to 1.0Gig

I have switched the logic boards and the Ram. It powers up fine but will not boot from the HardDrive or a utility CD. I can see both the HardDrive and the Utility CD booting with the option key. But will not boot. Any ideas on what I can Try

Thanks,

Top
January 31, 2007 - 12:07pm
gobabushka
gobabushka's picture
Offline
Last seen: 2 months 1 week ago
Joined: Apr 26 2004 - 16:30
Posts: 495
id try the standard stuff. re

id try the standard stuff. reset the nvram, reset the pram. cuda switch.

Top
January 31, 2007 - 12:50pm
gobabushka
gobabushka's picture
Offline
Last seen: 2 months 1 week ago
Joined: Apr 26 2004 - 16:30
Posts: 495
id try the standard stuff. re

id try the standard stuff. reset the nvram, reset the pram. cuda switch.

Top
January 31, 2007 - 1:33pm
swizler
Offline
Last seen: 17 years 2 months ago
Joined: Jan 31 2007 - 10:36
Posts: 3
I should have mentioned that

I should have mentioned that I had already tried resetting those. Could it be an AT/100 or AT problem with the drives? are those compatatible?

Top
Log in or register to post comments