Apple II Joystick Question....

3 posts / 0 new
Last post
A2forever's picture
Offline
Last seen: 6 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 226
Apple II Joystick Question....

hey all........ is it possible , to rig up a adapter for an Apple II joystick that works on a IIE or IIC , to work in a Apple II PLUS? I checked ebay , and alot of the joysticks now are IIE or IIC , would be nice to get one working on one of my II PLUS's..........

Thanks.

A2forever

Offline
Last seen: 8 years 4 months ago
Joined: Apr 10 2006 - 20:01
Posts: 1013
Do you want to build one of t

Do you want to build one of these?
http://www.connectworld.net/cgi-bin/iec/fullpic?YV28Bqei;L1581;17

Here's the FAQ with DB9 and DIP pinouts:
http://home.swbell.net/rubywand/R023PINOUTS.TXT
(look for "Apple II Joystick")

Offline
Last seen: 14 years 8 months ago
Joined: Feb 4 2007 - 19:01
Posts: 1
joystick question

I have seen and item called a "paddle adapple", which comes in several differernt configurations. I have one that has a 16 pin ribbon cable that plus into the connector on an Apple ][/][+ board and then runs out the back to a smaller board with two din9 connectors and a switch. This allows you to plug in two //e style joysticks and switch between them. I have seen these around on Ebay from time to time.

Hope this helps,

Chris S.

Log in or register to post comments