Hi again ! A problem with scsi harness (powercolour classic)

1 reply [Last post]
Joined: Mar 2 2004
Posts: 15

I dont know the way to put the scsi cable into harness.Its very hard to put into metal points....someone could explain me a bit more please?


Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
eeun's picture
Joined: Dec 19 2003
Posts: 1891
Low-tech solution

I used a block of soft wood to connect my scsi cable to the harness.

I positioned the cable over the metal points, then used the end of the wood block to push the cable into the points.

You could also put the whole thing, including the wood, into a vise and press it together.

I used the end-grain of the wood (the end on which you can see the tree rings) to push in the cable, as it's soft and allows the pins to enter the wood slightly without bending them but still applies good pressure to the cable.


"Give a man a fire, he's warm for a day. Set a man on fire and he's warm for the rest of his life."
(Terry Pratchett)