Fitting PAL Encoder card

3 replies [Last post]
Offline
Joined: Mar 2 2010
Posts: 6

Hi

I recently managed to obtain a PAL Encoder card to give me colour (color) output from my Europlus.

Is there a recommended slot to fit this into?

Also, the card has a trailing wire (Orange, in my case), which I assume has to be connected to the motherboard somewhere.

Which connector should this wire be attached to?

Regards
Mark

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
khw
Offline
Joined: Mar 14 2010
Posts: 7
Pal Encoder

Hi,
do you own a Digitek PAL Encoder Board? As far as I remember the PAL Encoder Board fits into slot 7 usually. The wire should be connected to video pin on the auxiliary video output connector J14(?)at the right side near the cassette and video output ports. J14 has four pins. I will try to find the manual for this card to check the correctness of the video pin on J14.
Kind regards,
Karl

khw
Offline
Joined: Mar 14 2010
Posts: 7
Pal Encoder

Hi,
I found the manual for the Digitek Clour Encoder Card. I should also have a complete Apple PAL Encoder set. Let me know how I can help you.
Kind regards,
Karl

Offline
Joined: Mar 2 2010
Posts: 6
The seller sent on the origin

The seller sent on the original documentation for the Apple PAL Encoder card so when I get some time, I'm going to fit it and try out some "colour" games. It also came with a modulator attached, for plugging into a TV.

Thanks for the offers of help.

Incidentally, the trailing Orange wire from the PAL card I enquired about, plugs onto the 3rd pin from the left (or second from the right), of the 4 pin connector closest to the video output, at the back-right corner of the motherboard, within reach of slot 7.