Reviving a PowerBook 5300

4 replies [Last post]
Offline
Joined: Mar 19 2008
Posts: 38

So, I got an old PowerBook 5300 from my sister-in-law, and being an enthusiast of vintage apple computing, (although I'm not sure this is quite vintage) I'd like to bring it to working order. It boots, and everything, but it's got a lot of junk on it, and I'd like to re-install MacOS It had 7, but I'd like it to do 8. Can that be done? I'm really new to apple stuff (other than the apple II) so, where do I start? Buy OS8 Floppies? Do I need a key, like Micro$oft Windows?

Thanks!

~Mark

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
cwsmith's picture
Offline
Joined: Oct 13 2005
Posts: 699
Mac OS for PB 5300

The PowerBook 5300 will do up to Mac OS 9.1, but I'm not sure I'd go above 8.5 or 8.6, especially with just the stock 8MB or so of RAM.

The last Mac OS to ship on retail floppies was Mac OS 8.0, and those floppies are getting to be rare as hen's teeth. 8.0 was also available on a CD-ROM, but I'm not pulling up any 8.0 installers (floppy or CD) in an eBay search at the moment.

You can get a retail copy of Mac OS 8.5 at FastMac.com, or on eBay. Just make sure it's a retail copy, not one for an iMac, iBook, or other specific machine.

The 5300 had no CD-ROM drive, but a SCSI CD-ROM drive can be had on eBay as well. You'll need a special cable to connect a CD-ROM drive (probably DB-25 or Centronix 50 connector) to the PowerBook's HD-50 SCSI port. Again, eBay.

While you're poking around you might consider an ADB Apple mouse (or one by Macally or Kensington), or a ZIP drive for the expansion bay. Maybe a SCSI scanner, or an Apple QuickTake camera (the QuickTake 200 is a really nice model, the only QuickTake I don't have).

Don't sink a whole lot of money into this machine, though. You're not going to be able to do much productive work on a machine of this age. AppleWorks for Mac OS 8 and 9 is also hard to find, and Microsoft Office 98 is the last that will run reliably. iTunes 2 is pretty limited, especially without a CD-ROM drive. And best of luck to you in finding a reliable printer with compatible Apple printer port connectors and Mac OS 7/8/9 drivers.

If you recognize the machine for what it is: a geeky rebuild project and history lesson, you could have some genuine fun tinkering, as long as you don't let yourself get frustrated.

__________________

Dozens of Macs; a handful of PCs; Apple ][e, ][c and ][gs; a few iPods; lots of parts
17 guitars, 2 baritone guitars, alto guitar, 6 bass guitars, bajo sexto, 3 ukuleles, mandolin, banjo, sitar
3/4 scale upright bass, 4pc drum kit, congas, travel congas, bongos, cajon, cabasa, 12 harmonicas
http://www.cwsmith.fmhttp://www.facebook.com/cwsmith2620

Offline
Joined: Jan 20 2005
Posts: 700
i had one of these, was my fi

i had one of these, was my first powerbook. i managed to get a clean install of either os 8 or 7.6 by installing it on another machine, and then used an emergency boot disk to get the powerbook to boot the book, and copy that floppy to the hard drive. i then broke all the parts of the OS install from the other machine down to floppy size with a program i cant remember the name of, but im sure someone here has used it before or one like it. while booted from the hard drive which now has a bare emergency system on it, i copied all the floppies over to the disk and put them all back into one system folder and it worked. it is a very slow process but if you dont have an external cd rom then yea, do this or....

The OTHER way to get this to work is if you own a powermac with a SCSI port, find yourself the adapter that turns your 5300 into an external Hard drive and install the OS to that from the powermac.

__________________

-Justin
(dead) PB100, Q650, PB Wallstreet, beige G3, Imac snow 600, Ibook g4, SE30, (dead) IIsi, TiBook 667VGA, PBg4 1.5, MDD dual 1.25ghz, 1.8ghz g5 tower.
OS7.5 to 10.3.9. I LOVE CLASSIC MACS!

gsmcten's picture
Offline
Joined: Oct 4 2005
Posts: 2616
5300's

I have several. I replaced the hard drive on the one I use to a CFFA card with adapter and used a SCSI CD to load OS 9. It runs nice. The biggest problem I have found is trying to hook-up to the internet. I have a card for that now, but I haven't had time to play with it for a while.
The experimentation shall begin soon. Smile

__________________

Steven (gsmcten)

"Apple ][.....It's ALIVE!!!!!"

Offline
Joined: Aug 22 2010
Posts: 10
Use System 7. With 8MB of RAM

Use System 7. With 8MB of RAM, I think anything after 8.1 would be like trying to drag a Supertanker with a Vespa.

__________________

Sawtooth G4 - 450MHz
Mac OS 10.4.11, 9.2.2

HP Pavilion zv6000
AMD Athlon 64
Ubuntu Lucid Lynx 10.04