Apple Network Server Loaded but Needs OS CD! 700/200

7 posts / 0 new
Last post
Offline
Last seen: 15 years 9 months ago
Joined: Aug 21 2004 - 04:42
Posts: 47
Apple Network Server Loaded but Needs OS CD! 700/200

Hello,
I have a ANS 700 and its loaded but I need a OS. Can any one tell me where I can get one?

Thanks All,
Mark Jozaitis

Jon
Jon's picture
Offline
Last seen: 12 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
The ANS needs AIX, either fro

The ANS needs AIX, either from Apple or IBM. I doubt either has it for sale anywhere. Maybe you could run LinuxPPC on it? And, of course, Mac OS will NOT run on one of those.

smykes24's picture
Offline
Last seen: 13 years 9 months ago
Joined: Dec 20 2003 - 17:00
Posts: 52
This link: http://www.demons

This link: http://www.demonsys.com/ans/ has detailed information on running linux on Apple Network Servers.

Offline
Last seen: 16 years 8 months ago
Joined: Jun 8 2004 - 15:14
Posts: 48
You need AIX running first

I believe you need AIX running on the ANS before you can install another OS to lauch off of it.

http://www.shiner.info/?manuals/installing_YDL2_ver1.8.html

Thank you,
Chris

Jon
Jon's picture
Offline
Last seen: 12 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
I didn't read anything in the

I didn't read anything in there about needing AIX in particular. You will need some OS on the ANS if you intend to use it and it's floppy drive to make all the boot floppies, but that stuff can be done on nearly any floppy equipped machine.

Offline
Last seen: 15 years 9 months ago
Joined: Aug 21 2004 - 04:42
Posts: 47
All this really does not help

All this really does not help me, it needs a non burned cd becuse its older, ant all this one dose is boots to the firmware. I need the real cd. Any ideas on that?

Eudimorphodon's picture
Offline
Last seen: 3 months 2 weeks ago
Joined: Dec 21 2003 - 14:14
Posts: 1207
Re: All this really does not help

All this really does not help me, it needs a non burned cd becuse its older, ant all this one dose is boots to the firmware. I need the real cd. Any ideas on that?

Just as an aside, if you need to boot an older machine with a burned CD... try different media. Some types are more friendly to older drives then others.

As a general rule, in my experience the "blueish" tinted blanks which seem to be the common cheap ones today are useless in old drives, particularly if you burn at high speeds. The best media seems to be the old gold colored stuff. (Which is often only rated for 2x-4x burning speed.) That is hard to find these days, of course, although if you're desperate, it might be worth trying the "audio-grade" media they sell which is labeled as being compatable with car and audio CD players. I think it might be the same thing, but I haven't tried using it for data myself.

The older but still available "greenish" stuff works fine in the SCSI drive I got out of a 7200. That's about the same vintage as an ANS.

--Peace

Log in or register to post comments