Replaced brake hardware on my '94 GMC - shaking gone

5 replies [Last post]
Jon's picture
Jon
Offline
Joined: Dec 20 2003
Posts: 2804

I just wanted to make a post about how I solved some issues on my truck for a cost of under $100 and part of an afternoon.

Truck: 1994 GMC C1500 4.3l Vortec v6 w/ ~215k Miles (base low-end gas 1/2ton 2 wheel drive)

I was to drive to my in-laws a few days ago when I noticed some odd sounds coming from my front passenger tire. I was only a matter of blocks from home, so I turned around and went back. Turns out it's a good thing I did, becuase the caliper had frozen and was heating the disc a serious amount! Jacked it up and pulled the wheel. I couldn't touch any metal on the hub aside from holding the lug-nuts long enough to put them in the hub cap for safekeeping. Drivers side was warm, but not nearly so bad. It was at least 30 mins to an hour before I could touch the hub and try turning it. It was very difficult to move, and the pads were very worn. I let it sit over night and I still couldn't get it to turn easily like it should have. I deduced that the piston in the caliper had frozen in place and if I had kept going on my trip I might have been on the side of the highway with a flaming wheel. Shock

Run time forward to yesterday, when I had both the money and time to fix the problem. I spent about $14 (after a core charge refund of $30) on a caliper, $16 on a set of semi-metallic front brake pads, $3 on a can of brake fluid, $2 on a can of brake parts cleaner, and about $25 for misc tools that are long-term purchases: set of box-end wrenches, hex wrenches, and a 5" C-clamp. Total: $60 after the refund for the old caliper.

I pulled the old caliper with a large hex wrench, 3/8"? Then I pulled the brake line and quickly tried to attach the line to the new caliper. Didn't go as easily as I imagined, but dripping hydrolic fluid tends to get in the way of things at times like that. Tongue Installed the new pads, stuck the caliper over the rotor and bolted it down. Then came the fun part: bleeding the line and filling the caliper pison w/ brake fluid. I called my wife out and she worked the brakes as I worked the wrench. I loosened the bleeder valve had her slowly press the brakes until fluid rose just out of the valve. Called "stop" and closed the valve. The idea was that any air in the line would be flushed by the time the piston filled with enough fluid to come out of the bleeder. Then I went and checked the brake fluid res. under the hood, and watched the level as she released the brakes. Added a bit of fluid to keep it from emptying below the minumum.

Started the engine and did some leak testing with the power-brake assist. Seemed fine, no leaks, good pressure at the pedal. Put the wheel back on and went for a drive. Nothing odd, but the shimmy/shake during braking that I got occasionally went away too. I had thought it was the shocks, but I guess not. Laughing out loud

Back home I pulled the other front wheel and caliper to change the pads on it. I just pulled the cap off the brake res., and pulled the outside pad from the caliper. Then, careful to keep things aligned and straight, I used the C-clamp over the back of the caliper and on the worn pad to compess the piston. If you're careful and watch for straight even presssure and go slowly, a $5 C-clamp can do the job of those expensive $100 compressor kits. Once done I pulled the inner pad and put on the new ones. Reinstalled the caliper, bolted on, reinstalled wheel, bolted on. Went for a drive.

Braking is smooth, fast, and steady. No new shocks for the time being! Whew.

Not bad for an ameture wrench monkey. Cool Soon it'll be the windshield and tires to replace, then I can have an inspection and get updated tags on it... At least I won't do those myself. :Smile

__________________

I am not in this world to live up to other people's expectations, nor do I feel that the world must live up to mine. - Fritz Perls

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
eeun's picture
Offline
Joined: Dec 19 2003
Posts: 1891
Feels good!

It's a great feeling to fix something like that on your own, isn't it? Congratulations!

I've been a shade-tree mechanic for a couple years now - originally out of financial necessity - and it's a real confidence builder knowing you don't have to rely on someone else for the 'small stuff'.

I've had the calipers on the K-Car off a few times when I was replacing the hub bearing, and again when I had to replace the CV axle (it was sounding like I got a drum-roll every time I cornered - probably in suspense of whether the wheel would fall off or not Wink). I replaced the rotors and pads and gave the caliper piston a good cleaning. When I bled the brakes, the first fluid to come out was a horrible rusty brown - I don't think they'd been done for a while Tongue.

It was a good excuse to buy some new tools, and still came in well under what a garage would have charged.

__________________

"Give a man a fire, he's warm for a day. Set a man on fire and he's warm for the rest of his life."
(Terry Pratchett)

Offline
Joined: Dec 20 2003
Posts: 44
I just got done replacing the

I just got done replacing the timing chain on my '94 sonoma... That was fun.. Now, its on to the brakes, because my back drums are warped. Fun Fun.

__________________

damn the torpedos, full speed ahead!

Jon's picture
Jon
Offline
Joined: Dec 20 2003
Posts: 2804
I'm planning on having my fro

I'm planning on having my front rotors turned when I get new tires. (very soon I hope) I know they should be checked when ever you do work on the brakes, and in my situation there is a good chance that the rotor may have warped a little.

During the past few days I've found that road noise is down considerably. I can listen to the radio at a lower level and still hear clearly, and bass comes through much better. I'm guessing that the old pads were creating alot of low-freq noise. New front tires and an alignment should help even more.

__________________

I am not in this world to live up to other people's expectations, nor do I feel that the world must live up to mine. - Fritz Perls

Offline
Joined: Dec 20 2003
Posts: 851
I did the brakes on my car la

I did the brakes on my car last november. It felt really neat to be able to do something myself on it. very liberating.

__________________

Dr. Bob
Applefritter Admin

jt
Offline
Joined: Dec 20 2003
Posts: 447
Re: Feels good!

eeun wrote:

. . . a good excuse to buy some new tools, and still came in well under what a garage would have charged.

When I did the first fix to my first car . . . a water pump, IIRC . . . I bought my first set of socket wrenches. My Dad told me: "Every time you use a wrench on a car repair, you've paid for the whole set."

jt Wink

__________________

Perpetrator of the 68kMLA's text format impaired: Peripherals Links Project(tm)
. . . and LinksProjectClassic(tm)