Imac DV Powerboard

No replies
Offline
Joined: Nov 28 2004
Posts: 1

Hi All,

I have an iMac DV with a broken screen which I took apart. I have the iMac running again with an atx power supply. I looked at the powerboard(small board normally attached with the cable for the harddrive) and was wondering if I could use it instead of the atx power. It needs just 1 input and makes all the conversion to the motherboard. I read somthing about an input of 24 volts. Is this correct and did somebody try this before?

Thanks in advance,
Jurjen