quicksilver dual processor in a digital audio

4 replies [Last post]
Offline
Joined: Jun 8 2004
Posts: 3

hi gang - ive got a 733 digital audio and a dual gigahertz quicksilver processor - i assume im going to have to hack the fan and cooling some to get it to fit the larger dual heatsink and ive seen a pic and hints about needing 12 volts on some screw hole on the cpu card to make it work but nothing clear enough to tell which hole to connect to the 12 volts - any other tips or suggestions would be appreciated too - thanks in advance

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
Offline
Joined: Dec 20 2003
Posts: 851
It's the one off by itself.

It's the one off by itself.

__________________

Dr. Bob
Applefritter Admin

Offline
Joined: Jun 8 2004
Posts: 3
thanks but...

there are 5 holes on the quicksilver dual gig cpu module - three are the same as the digital audio motherboard screw mounts - but there are two others and both are about as far apart as any other pair of holes - i really would like some clarification as i dont want to fry anything

Offline
Joined: Dec 20 2003
Posts: 851
Post a pic and I'll show you.

Post a pic and I'll show you. If you have a multimeter it's the only one that's not conencted tot he ground plane.

__________________

Dr. Bob
Applefritter Admin

Offline
Joined: Jun 8 2004
Posts: 3
thanks a bunch

ill check it with a meter and see