Apple II

Apple IIe w. Uthernet II card - ADTPro system hang

Submitted by tokabln on February 7, 2016 - 6:41am

Dear folks,

I'm using a Uthernet II card installed at slot 7 of my Apple IIe which works fine with Contiki.
When using ADTPro and selecting the (E)thernet connection the system seems to start loading the necessary bin file

"STARTING ADTPROETH.BIN ..."

and after some seconds Drive 2 starts spinning and stopping but then the system hangs.

Forums: 
Apple II

Apple IIe Help

Submitted by mikemike690 on February 5, 2016 - 7:07pm

I'm brand new to old Apple computers and I was wondering about an Apple II I have just brought. When I startup without a disk it just says Apple II no cursor or anything according to the original manual. Do I need a DOS 3.3 disk to install or? Also I've got a text card in the AUX slot but when I launch specific programs it says it requires 128KB ram but also according to the manual I've apparently got 128KB does this mean that the ram chips have failed? Thanks

Forums: 
Apple II

IIgs and adtpro

Submitted by cfaust on February 5, 2016 - 4:08pm

Apple IIgs

]IN#2\
]\
]\
]

Forums: 
Apple II

Apple //c issues with connecting to ADTPro

Submitted by Anovah on February 3, 2016 - 3:04pm

The quick version: It looks like ADTPro is sending correctly but the //c doesn't show any communication.

Forums: 
Apple II

Apple IIe and telnet port 23

Submitted by skipper1947 on February 3, 2016 - 10:26am

This concerns connecting to an Apple IIe using telnet and the default port 23. I have read that port 23 is not a good idea due to security issues.

But I suspect this is for connecting to modern computers, not an old Apple IIe which is not smart enough to respond to such tactics, is that true?

Forums: 
Apple II

Interesting Apple IIe Similiar to Super II

Submitted by transwarp II guy on February 1, 2016 - 7:15pm

I’ve got a really humdinger of an Apple IIe for you guys to examine…

My wife has been hounding me to sell off some of my collection to make room, so I’ve been digging around… and am thinking about selling what I believe to be a prototype Apple IIe. I think it’s a prototype anyways; at the very least I’ve not seen any other Apple IIe like it in the last 20+ years I’ve been collecting these machines.

The case has no serial #, and the motherboard looks a lot like the “Super II” prototype, but slightly different.

Forums: 
Apple II

Open Apple - an Apple II podcast

Submitted by mmphosis on February 1, 2016 - 11:26am

Open Apple is a podcast dedicated to the Apple II.

Forums: 
Apple II

IIGS video question

Submitted by cfaust on January 30, 2016 - 9:37pm

solder a jumper from pin 3 to pin 15 on the logic board for the upscaler.

Forums: 
Apple II

Apple 3.5 drive isn't recognized on Platinum IIe

Submitted by rick71 on January 29, 2016 - 9:08pm

I just got a Platinum IIe. I put my 5 1/4 I/O card in the IIe and both drives seem fine. I put my 3.5 Drive controller card (603-9107-A LIRON) in and attached my 3.5 drives (A9M0106) drives, first both daisy chained, then individually. At no time were any of the 3.5 drives accessed. I have the 3.5 card in slot 5 and the 5 1/4 card in slot 6.

Yesterday or the day before, the 4 drives were daisy chained to a IIgs and worked.

Does anyone have any pointers in troubleshooting this?

Thanks.

Forums: 
Apple II

][gs set up

Submitted by appleaut2115 on January 29, 2016 - 6:27pm

I start machine, load disk, and get 'cannot find PRODOS' and it goes no further...

Forums: 
Apple II

Pages

Subscribe to Apple II