Apple II

Graphics, sounds, and read/write

Read/write queries and questions about creating and importing graphics or sound.

Forums: 

Maximum Number of Hard Disk Drives / CD-ROM drives in ProDOS 8 and GSOS?

Hi. What is the maximum number of ProDOS 8 hard drives in the last version of ProDOS 8 in an enhanced //e?

What is the maximum number of ProDOS 8 hard rives using GSOS 6.0.1 in an Apple IIGS?

What is the maximum number of GSOS hard drives using GSOS 6.0.1 in an Apple IIGS?

Also, the same on CD-ROM drives.

Thank you very much.

Forums: 

Angry Floppy Drive

I have an Apple IIe, for which I lost my original drive. I bought a replacement off of eBay, which seemed to have been tested.

Forums: 

CKeeper

Info on the never sold Ingenuity CKeeper

Forums: 

Apple /// Repair Help Needed

I recently bought an Apple /// (256k model), Monitor ///, Disk /// external drive, manuals, and software. All of the units are cosmetically in amazing condition (no yellowing, no keys missing, etc). However, the /// itself doesn't work. What's strange is when I first turned it on, the computer started perfectly (it said something on the screen, maybe "retry"? I can't remember). After turning it off and coming back to it only about five minutes later, I flipped the switch only to find a screen full of garbled, flashing pixels.

Forums: 

Badge Emblem Logo Decale Label replactment for llGS FDD

I got a IIGS with 2x3.5" and 1x5.25" floppy drives at a flea market.

Forums: 

AppleWorks Question

I am trying to boot up AppleWorks. This is from copies I made of originals in 1985, so I think it is version 1.3 maybe. After the Startup disk, I put in the Program disk. I get the message:

Your copy of the AppleWorks PROGRAM disk must be in drive 1. The write-protect notch must be uncovered.

The copy has a notch on the side.

The system is:
enhanced Apple //e
AE RamWorks III
Apple Mouse Card in slot 4
I/O Controller card (Duodisk card) in slot 6
ZipChip 8Mhz
Apple Numeric Keypad
Duodisk

Forums: 

ADTPro Virtual Serial function

I have had problems with this program, so I would like to try what is described as the, "Virtual Serial over IP" function as described here: http://adtpro.sourceforge.net/misc.html#Virtual_Serial

I am clueless on how to do this. I did not know which emulator to use so I shot in the dark and chose Applewin since it supports Uthernet emulation but I could not get any further than that since I could not find any REM entry on the batch file on ADTPro on how to start ADTPro with a "localhost" setting.

Any thoughts?

Forums: 

IIGS and SCSI

I have a ROM 01 IIGS with a scsi card installed and connected to an external SCSI HD. I got a hold of a SCSI CD-ROM and connected it to the HD. I installed a terminator block
on the CD drive after connecting it to HD. Now the computer is behaving oddly. Sometimes it boots but almost just hangs up---frozen. The HD is the boot drive. I guess I don't know
much about SCSI. Any help would be appreciated.

Forums: 

Understanding the Apple II mass storage

I've been contemplating my options regarding hard drives for my Apple IIGS. There are quite a few alternatives available and the CFFA3000 and Focus IDE seem to be the most popular.

I currently have a Unisdisk Disk II/Smartport emulator in my IIGS and after having done a bit of research I've begun to wonder if that would be sufficient for me. There are a few things I'd like to get some clarification based on facts and experiences to help me make up my mind:

Forums: 

Pages

Subscribe to Apple II