Apple II

Hello everybody,I write from Italy and I joined this active group because I was looking for information on how to identify the boot problem of my Apple IIe that I used when I was young.My first computer was the AIM-65 (the same 6502)I would like to know if anyone can help me identify the problem step by step.For now I am dealing with deep (very deep) cleaning.Here you see my idea of MoBo in the dishwasher at 65 ° C (with degreaser and detergent without rinse aid) and then in the oven at 45 * C for 8h.Isopropyl alcohol is very expensive now.

I have one Videx card, but the softwitch board is damaged, wires are broken and IDK which wire belongs on each pad, and the 16-pin header is missing one leg.

I could use a diagram for the card, to build another one; or a replacement softswitch kit. I have an AE 80 col card but it is absolutely filthy with some corrosion. I'm working on restoring it, but I have been a few days  at the task, and have more to go. 

I would like to know where to get one of these chips for my Apple IIe (enchanced).

I think this maybe my start-up problem I a having.

I've been searching the internet but no luck.

Anyone know where I can get one?

Hey, all.

So I've got my PC Transporter installed in slot 7 of my IIgs ROM03, connected to an AppleColor RGB monitor by way of the ColorSwitch. And although all Apple II graphics modes display perfectly fine thru this connection, whenever the PC Transporter is engaged and switches to MS-DOS, the video starts rolling up the screen. Adjusting the VHOLD of the monitor does not fix the issue. Before anyone asks: Yes, I have slot 7 set to "Your Card" and I have tried using different slots.