AirPort Signal Strength Units

1 reply [Last post]
alk's picture
alk
Offline
Joined: Dec 20 2003
Posts: 373

What units are being reported by Apple for AirPort signal strength?

If you run:

cd /System/Library/PrivateFrameworks/Apple80211.framework/Resources<br />
./airport -I<br />
./airport -s

You'll get some good info about your wireless setup. I'm guessing that avgSignalLevel and avgNoiseLevel (-I option) are reported in dBm, but when you use the -s option, you'll get a column labeled "Sig" with a different value (this time, it's positive).

So what units are used in the "Sig" column?

And can someone help me understand the meaning of negative dBm? I get that 0 dBm = 1 mW, but I can't really imagine that the received power is less than one milliWatt. So what does a negative value mean, and if it is just a measurement relative to some other baseline value, then what is the baseline?

Thanks!
Drew

__________________

Read the 5300 FAQ: http://www.alksoft.com/5300_FAQ/
Join the Resistance! Enlist in the PowerPC Macintosh Liberation Army!

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
italianapple's picture
Offline
Joined: Jan 28 2007
Posts: 94
Re: AirPort Signal Strength Units

The negative sign does not mean that you have less power. The 2 values are using two different measure units, dBm and Watt. In WiFi, 0dBm means that you have the maximum signal strength in your Antenna (RSSI - Received Signal Strength Indication).
If you are using Leoaprd, hit the Option bottom and keep pressed + Click on the AirPort Icon, a menu will appear telling you your RSSI value.

Paolo-