Apple Pro USB Keyboard Disassembly

3 posts / 0 new
Last post
Offline
Last seen: 7 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 211
Apple Pro USB Keyboard Disassembly

Does anyone know with certainty what I need to release the screws holding this keyboard together? I've tried my usual selection of Torx and hexagonal drives (metric and inch) but none seem to work.

TIA,

Phil

iantm's picture
Offline
Last seen: 3 years 2 weeks ago
Joined: Apr 2 2005 - 14:01
Posts: 709
pro usb kb disassembly

I've taken them apart before. I know that it's a mix of small hex and phillips head. You'll also have to poke through the label on the bottom to get at a good number of the screws. It's been a good seven months since I've done this, but that's as good as I recall.

- iantm

eeun's picture
Offline
Last seen: 1 year 21 hours ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
Yes

Those wee hex guys must be removed.

Once those are off, as mentioned above the inner screws are phillips. IIRC there are two 'hidden' screws under the caps lock and numeric keypad that must be removed to pull the keyboard off the backing plastic.

Log in or register to post comments