Well, I'm having routing problems that I can't seem to alleviate. Simply put, I am able to ping all devices on one side of the network, but the other side of the network can ping none of the devices on the other side of the network except the two ethernet ports on the router itself.
I am using two linksys wireless routers in this project, one is a Linksys BEFW11S4 running firmware version 1.52.02 from Linksys and the other is a Linksys WRT54G running Firmware Version: Alchemy-V1.0 v220.127.116.11sv from SveaSoft.
The BEF11S4 will be refered to as "Linksys" and the WRT54G refered to as "SveaSoft" respectively.
The Linksys router is connected to the internet via the WAN port and the routes outside traffic to the private network on the inside (192.168.1.0 network). The SveaSoft router is connecting wirelessly to the Linksys router. The wireless link is part of the 192.168.1.0 network and is then routing traffic to the 192.168.2.0 network.
All devices on the 192.168.2.0 network are able to communicate with all devices on the 192.168.1.0 network via a static route. The devices on the 192.168.1.0 network attempt to ping devices on the 192.168.2.0 network they get destination unreachable responses. Both routers have static routes to each other which is what is confusing me about this situation. I can ping both addresses on my SveaSoft router, 192.168.1.2 and 192.168.2.1, from the 192.168.1.0 network, but that is it.
My goal is to be able to do port forwarding so that my servers here on the 192.168.2.0 network can be reached from the outside world, but I'm running into this roadblock that is killing me.
Any help would be greatly appreciated.