PowerMac 5500/225 Wiring Harness Pinouts

5 posts / 0 new
Last post
Offline
Last seen: 19 years 8 months ago
Joined: Dec 20 2003 - 10:38
Posts: 9
PowerMac 5500/225 Wiring Harness Pinouts

Ahoiye There, is there anyway i can find pinouts for the powermac 5500/225's wiring harness, since i want to use an external powersupply and monitor

Offline
Last seen: 1 week 5 days ago
Joined: Dec 19 2003 - 17:40
Posts: 566
i dont have a link handy but

i dont have a link handy but ... look into the Power CC sites ... as the 5500 uses the same pinout as the 630 (which is a common PCC mod) ...

TOM

Offline
Last seen: 3 years 6 months ago
Joined: May 31 2004 - 06:04
Posts: 24
it isnt much help since i wan

it isnt much help since i want to make my 5500/225 a desktop without a built in monitor, because the monitor has been playing up. It has a blue hue sometimes and takes a long time to warm up.

Offline
Last seen: 1 week 5 days ago
Joined: Dec 19 2003 - 17:40
Posts: 566
Re: it isnt much help since i wan

it isnt much help since i want to make my 5500/225 a desktop without a built in monitor, because the monitor has been playing up. It has a blue hue sometimes and takes a long time to warm up.

well then get yourself a 630 case ... the 5500 board should just slide in ... a 630 should be pretty cheap to find and save alot of hacking work ... the only thing you might need to do is the PSU mod that is needed on PCCs ...

TOM

MacTrash_1's picture
Offline
Last seen: 17 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 318
Re: it isnt much help since i wan

it isnt much help since i want to make my 5500/225 a desktop without a built in monitor, because the monitor has been playing up. It has a blue hue sometimes and takes a long time to warm up.

You can also put the logic board in an LC580 (smaller AIO)

http://krowmagnum.4mg.com/photo6.html

ShreveSystems has brand new in the box LC580's for a little more than $50.00 shipped in the US. Pretty good deal, slap in your 5500 board with 2 64MB sticks of RAM and a L2/G3 300MHz card and you'll be amazed.

or it will fit into the 64/6500 PPC Macs Towers. I have put my 5500 board in my Performa 638CD which I think is the same as the 630 and it worked.

Krow

Log in or register to post comments