imac won't power up!

9 posts / 0 new
Last post
Offline
Last seen: 17 years 2 months ago
Joined: Jan 29 2007 - 13:00
Posts: 2
imac won't power up!

Hi, this is my first post here, so I hope I'm in the right place (right website, right forum) for what I need. I have an imac that's been having trouble powering on. It powers on fine if it has only been just briefly shut off, but if it is off for any length of time it has problems. It will rev and the l.e.d. light will flash, but it has trouble "catching". Sometimes, if I work and work at it, it will finally catch and power up. But not this time! Right now it's been black screen for over two weeks! Currently, I am not always able to get any noise or light. I tried readjusting the internal power button, which did look out of alignment, but that did nothing. Any ideas?

Hawaii Cruiser's picture
Offline
Last seen: 7 years 3 weeks ago
Joined: Jan 20 2005 - 16:03
Posts: 1433
May be time to blow taps...

If you've never changed the PRAM battery, you could try that. Otherwise, it sounds like the famous old PAV board problem that eventually plagues so many iMacs. Unfortunately, if it's the PAV, it's basically fatal, since replacement is not worth the expense. Do a search on this site for PAV and you'll find it discussed many times.

coius's picture
Offline
Last seen: 10 years 2 weeks ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
you didn't happen to try installing OS X on it?

sounds like you did without upgrading the firmware...
What revision is this? (bondi, Fruity, DV, Etc..)

Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
The quickest question is, doe

The quickest question is, does it have a slot for the CD drive, or does a tray pop out?

The trayloaders have these symptoms when the analog board is dead/dying.

Hawaii Cruiser's picture
Offline
Last seen: 7 years 3 weeks ago
Joined: Jan 20 2005 - 16:03
Posts: 1433
Actually, I've encountered ma

Actually, I've encountered many slot loaders with the same problem. Of course, I forgot to ask, this is an iMac G3, not a G4, right?

Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
Of the slot-loaders I've seen

Of the slot-loaders I've seen with bad PAVs, they turn on, the power LEDs lights up, and they stay that way. From what I've read here,t he tray-loaders will power up and then back off if the analog board is bad.

Of course the OS X question is also very important.

Hawaii Cruiser's picture
Offline
Last seen: 7 years 3 weeks ago
Joined: Jan 20 2005 - 16:03
Posts: 1433
I think you're right. You're

I think you're right. You're a careful reader, Jon.

Offline
Last seen: 17 years 2 months ago
Joined: Jan 29 2007 - 13:00
Posts: 2
More on my imac

This imac is a slot loading G3.

The PRAM battery has never been replaced.

I did not try to install OS X.

Where I live there are no repair places for MacIntosh. The closest place is about an hour away, and as a school teacher with 3 small children, getting there is gonna be like planning and taking a field trip!

Any other ideas of what I might try myself before making the trek?

Thanks!

Offline
Last seen: 14 years 6 months ago
Joined: Dec 14 2004 - 20:14
Posts: 122
Check this site for battery p

Check this site for battery part numbers and sources.
Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
http://www.geocities.com/texas_macman/pram.html

 Cheers, Tom

Log in or register to post comments