resistors on wallstreet processor?

4 posts / 0 new
Last post
westieg3's picture
Offline
Last seen: 15 years 11 months ago
Joined: Apr 4 2004 - 18:03
Posts: 465
resistors on wallstreet processor?

well, i thorougly screwed up on overclocking my wallstreet. i can't bloody solder and lost two resistors. i'm sending it to a friend who can solder such small parts, but does anyone know the value of those resistors so that i can tell her which ones to use? i never want to solder tiny parts again.

Offline
Last seen: 15 years 9 months ago
Joined: Dec 18 2004 - 07:19
Posts: 13
The resistors are simply 0K,

The resistors are simply 0K, or a short, so you can use some conductive ink to reconnect the bridges. Some people just run a line of solder to each bridge, but this gets messy - an ink pen makes a much nicer job of it.

JB

TheUltimateMacUser's picture
Offline
Last seen: 6 years 1 month ago
Joined: Jan 28 2004 - 12:14
Posts: 615
aye

go to a pep boys, or a napa auto parts or something and get one of the conductive pens normally used to repair the traces of a rear windscreen defogger grid.

westieg3's picture
Offline
Last seen: 15 years 11 months ago
Joined: Apr 4 2004 - 18:03
Posts: 465
wonderful. i'll see if i can

wonderful. i'll see if i can get it running again tonight then.

Log in or register to post comments