recently,I repaired my disk drive.now it is ok.so I used adt.I wanted to transfer .adk to my 5.25 disk.but I fail,when it show test format.disk drive red lamp on.but it stopped.I have question is.when it test format.I should format disk before[target disk]?can it use dos format 5.25 disk or dos 3.3.how to do it?thanks
Anonymous
User login
Please support the defense of Ukraine.
Direct or via Unclutter App
Active forum topics
Recent content
Navigation
No Ads.
No Trackers.
No Social Media.
All Content Locally Hosted.
Built on Free Software.
We have complied with zero government requests for information.
Yes, you need to format the target disk before you have ADT write an image to it.
Steps:
1. Boot your ADT disk.
2. Quit ADT. (Remove the ADT boot disk.)
3. Insert your target disk.
4. type INIT HELLO
5. When done, swap the ADT disk back in the drive and BRUN ADT.
6. Take your ADT disk back out and insert your blank disk.
Now try your transfer!
I used your way in the website.but I still have problems.disk has
formatted.and this adt it shows awaiting answer from host.and it was
stopped.when I see the screen select d or s or r.I type "r"and ask the
files name.you can see the transfer folder inside right?then it show
awaiting from host and stopped.what is notice and careful?thx
Tell me more about your Apple II computer, and the serial connection to the "modern" computer. It sounds like there isn't a good connection between them...