PowerMac G4 800Mhz, Max HD size?

8 posts / 0 new
Last post
Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
PowerMac G4 800Mhz, Max HD size?

Hi folks,

I was wondering if anyone here knew how large of a ATA drive will be recognized by this machine? Fry's currently has a Seagate 1 TB ATA300 7200 RPM drive on sale for $100, and I'm really tempted. Thanks in advance.

Mutant Pie

eeun's picture
Offline
Last seen: 1 year 1 day ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
Re: PowerMac G4 800Mhz, Max HD size?

It gets confusing:

Yes, the G4 will support up to, IIRC, 2 terabytes. But you'll have to partition it.
You're limited to 127GB or about 200GB partitions depending on what you use to format it ( > OS X 10.2 for the latter).

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Re: PowerMac G4 800Mhz, Max HD size?

Eeun,

Thanks for the response. I assume that I can partition the drive using the disk utility on the OS 10 install disk (in this case it would be OS 10.4)?

Mutant Pie

Hokusai's picture
Offline
Last seen: 1 day 6 hours ago
Joined: Dec 20 2003 - 10:38
Posts: 256
Re: PowerMac G4 800Mhz, Max HD size?

I'm pretty sure that 1TB drive is probably SATA which your G4 didn't ship with natively. So, you would have to use a add-in pci card which probably circumvents the need to partition in smaller sizes.

eeun's picture
Offline
Last seen: 1 year 1 day ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
Re: PowerMac G4 800Mhz, Max HD size?

I just looked at Fry's site (we don't have Fry's up here) and the only 1 TB drives I could find were SATA. The largest PATA drive was 320 GB @ $49.
Getting a compatible drive would be important Wink

As an aside, it's not the best time to be buying drives. The flooding in Thailand has raised hard drive prices considerably, so even on sale you might not be getting as good a deal as you would by waiting several months. Before the flood, 1 TB drives had been $80-ish, and that's in Canada where there's usually at least a 10% price hike compared to the U.S. market.

Hawaii Cruiser's picture
Offline
Last seen: 7 years 3 weeks ago
Joined: Jan 20 2005 - 16:03
Posts: 1433
Re: PowerMac G4 800Mhz, Max HD size?

Fastest PATA bus was ATA133, so it's got to be SATA. Thus, SATA PCI card for Mac--$60?--plus you'd have to buy an SATA cable and a molex to SATA power adapter for a computer that was left in the dust years ago, but maybe that doesn't matter. How much does a used G5 tower go for these days? The G5 used SATA. But even a G5 has no future. I think it was the second generation Quicksilver 867mhz that broke the 127GB barrier.

Offline
Last seen: 1 year 7 months ago
Joined: Dec 20 2003 - 10:38
Posts: 52
Re: PowerMac G4 800Mhz, Max HD size?

The alternative to a PCI SATA controller, for G4s that don't have the 128gb limitation, is a PATA->SATA adapter. My MDD is using a 750GB drive connected with a card similar to this one.

Oelmuvun's picture
Offline
Last seen: 9 years 5 months ago
Joined: Nov 27 2005 - 06:57
Posts: 62
Re: PowerMac G4 800Mhz, Max HD size?

If I remember correctly the 800MHz single CPU Quicksilver was on the lowend of the 2002 variant. The Quicksilver 2002(800 933 dual 1GHz) supported large drives on it's internal channels, but not the original QS(733 867 dual 800).

Either way it is still nice to get a bootable SATA card in there. Biggrin

Log in or register to post comments