I know these are difficult to find now in 2019. I'm hoping I can try salvage some used sockets from old circuit boards. Does anyone know where these were mainly used? And does anyone have any sockets they're willing to sell?
I have found this board that looks like it may use some of the correct sockets?
I would probably try desolder the sockets if possible. Do you know which TI sockets have compatible pins?
I would just try to buy NOS sockets. They come up on ebay about once a month for several hundred dollars for an Apple-1 set. With practice and a micro-torch you can recover at the expense of the board these sockets, but it's a very painful process. Desoldering 50+ sockets is not fun even if you own a desoldering station.
[quote=Corey986]
I would just try to buy NOS sockets. They come up on ebay about once a month for several hundred dollars for an Apple-1 set. With practice and a micro-torch you can recover at the expense of the board these sockets, but it's a very painful process. Desoldering 50+ sockets is not fun even if you own a desoldering station.
[/quote]
Thanks Corey, but I don't think I can justify paying almost $500 for these. I have desoldered a couple already and it's quite quick so have no problem with that, and there is no damage to original PCB or sockets. I was just hoping someone knew where they were mainly used other than Apple-1. So far have seen them on some S100 and TI boards. I have not found any boards with 8 pin socket yet.
These TI sockets (with the wrong plastic frame) could be good pin donors...
https://www.ebay.com/itm/VINTAGE-RARE-Texas-Instruments-C9216-00-Integrated-Circuit-Sockets-Lot-of-100/283487050557
[quote=mi2k]
These TI sockets (with the wrong plastic frame) could be good pin donors...
https://www.ebay.com/itm/VINTAGE-RARE-Texas-Instruments-C9216-00-Integrated-Circuit-Sockets-Lot-of-100/283487050557
[/quote]
Great, thanks!
I began to slowly assemble parts for my assembly on the Newton board and immediately encountered the problem of choosing ic sockets. Authentic low profile TI ic sockets can be found only 24 and 40 pins. I got all kinds of NOS on eBay: Augat, AMP, and unnamed ones that look like TI sockets but with two holes at the bottom and no bead on the narrow side. The 8 pins are only modern. Can anyone advise something, thanks in advance!
Screenshot_2021-11-19-07-36-46-894_com.ebay_.mobile.jpg