IIGS - chirp sound when I shut off power supply

3 posts / 0 new
Last post
Offline
Last seen: 3 days 1 hour ago
Joined: Nov 25 2020 - 14:55
Posts: 33
IIGS - chirp sound when I shut off power supply

I have a IIGS ROM3 that makes a chirp sound from the power supply when I switch it off.  Otherwise, everything works fine.  Its a Dyna Comp LR62786 power supply shown here:

https://stayornay.com/mac84tv/repair-guides-documents/apple-iigs-power-s...

I've opened it up and don't notice any buldging capacitors.  I'm OK with doing the soldering work, where I struggle is ordering the correct parts.  For example on the above parts list, I can't even find item #3 100uF capacitor with 7mm pitch that meets the space requirements listed.   I can't find a capacitor kit for this power supply either.

Any tips on finding the source of the noise?

Offline
Last seen: 3 days 1 hour ago
Joined: Nov 25 2020 - 14:55
Posts: 33
IIGS - chirp sound when I shut off power supply

One other data point - the chirp occurs even when power connector disconnected from logic board (no load).

tony359's picture
Offline
Last seen: 2 months 2 days ago
Joined: Jun 16 2020 - 16:58
Posts: 291
Per your tests, the chirp

Per your tests, the chirp comes from the PSU itself. It may be simply a coil buzzing while the switching dies off. I wouldn't worry too much about it but one thing you could do is to reflow all the soldering joints on the PCB. Sometimes micro-vibrations may cause a crack in the solder, allowing the vibrating component to vibrate more and to generate sound. 

 

As usual, please remember that in that power supply there are lethal voltages: I do not advise you to open and to work on it and you should not follow my recommendations.

Log in or register to post comments