Figured I would make a new post as I've decided to let go of a few more things. I would really rather trade for other things for my remaining systems, but I might consider cash.
Mac Stuff:
***Powermac 8600/300
-224mb ram (2x64mb,6x16mb)
-FastSCSI bus w/Seagate, 10k rpm, 18gb drive & Applecd 600i opitcal
-ATTO pci SCSI card with 2xSeagate, 10K rpm, 18gb drives on ultra160 bus
-Radeon Rage 128 16mb VRAM (Will do 1600x1200, millions of colors)
-Onboard VRAM fully populated 4mb VRAM
-Case has very little discoloration
-Needs stock drive sled, floppy bezel, and possibly a blank drive bay cover.
-I have 2 tape/zip drive bezels
***Powermac 6218CD (Parts)
- motherboard and case only. Motherboard works and case looks great. Little discoloration.
***Mac LC III (Performa top case)
-1gb hard drive
-36mb ram (32mb simm + 4mb onboard)
-68882 FPU
-Maxxed VRAM
***Ram
-2x16mb, 72-pin simms
-2x32mb, 72-pin simms
***Apple 12" RGB Display
-512x384
-Case pretty dirty, but not very discolored (Might give a shot at cleaning it this weekend) Sits nice on an LC series.
***Keyboards/Mice
-Apple Extended Keyboard II (Needs a serious cleaning, but yellowing limited to space-bar
-Apple Extended Keyboard II (Ugly school etching, but works great for a bench keyboard or parts)
-2xApple Desktop Bus Keyboards
-3xApple ADB Mouse II, 1xApple ADB Mouse II (For parts)
***Network
-DaynaPrint localtalk to ethernet printserver
-Global Village Teleport Bronze modem
***Radeon 7000 PCI 64mb vram. (This one deserves a story...)
I bought this card to be the "Ultimate, end-all, fastest system 7 card." (With the hack drivers). Well, after much monkeying around, googling, etc... I couldn't get it going in my old powermac. Bummer. Was thinking about sending the card back, but tried it in my Powermac G5 and it works fine???
From what I have been able to scratch outta google searches is that it may have the newer/possibly flashed 64k rom, making it not work on beige macs??? I couldn't send it back as it was almost out of it's 30-day guarantee by the time I had time to start playing with it. It would make a great second video card for the right powermac. My G5 is a morph/bsd box so I really have no need. Perhaps you may wanna try your hand at running it with system 7 as well?
Apple II Stuff:
***Apple IIgs
-Rom 1 motherboard works perfect
-Battery replaced with a replacable setup
-Case looks as if someone tried to retrobrite. Bright but has some streaks.
***Apple IIc
-Looks pretty danged good except for plastic on drive unit is yellowed.
-Works great, not sure of ROM version
***Laser 128
-Looks pretty darned good. Not perfect, but no serious yellowing
***Accessories
-Apple disk interface card (Not Disk ][, ports needs some cleaning)
-Echo II speech card w/ external speaker
-Rana disk drive (Can't test as I have no Machine w/disk ][ card etc. It is a ribbon cable drive with a nifty little LED that lets you know the disk is write protected. I've seen a card on ebay from Rana for up to 4 drives, but I understand these work with Drive ][ cards as well... Sort of a curiosity)
What I could use:
-Microdrive or CF card interface card
-Apple II SCSI card
-Smartport interface (IIc)
-3.5" drives
-5.25" drives
-Apple IIc+
- Apple IIc monitor (Conlor or mono)
-Interesting IIgs cards?
-Apple II joysticks/paddles
-ADB Gravis gamepads/mousestick II
-Original ADB keyboard (The one originally shipped with GS)
-Applecd 150
-Original stylewriter
-Original Laserwriter or Laserwriter II
-IIgs rom 3 motherboard
Hit me up. If you have something I really want? I might just trade you the lot. Though I must admit the Apple II stuff is much harder to part with.
I'm interested in the Powermac 8600/300. I do have a performa 400 and a Powerbook Duo 230 if youre interested.
Update: (Only machine left)
Mac Stuff:
***Powermac 8600/300
-224mb ram (2x64mb,6x16mb)
-FastSCSI bus w/Seagate, 10k rpm, 18gb drive & Applecd 600i opitcal
-ATTO pci SCSI card with 2xSeagate, 10K rpm, 18gb drives on ultra160 bus
-Radeon Rage 128 16mb VRAM (Will do 1600x1200, millions of colors)
-Onboard VRAM fully populated 4mb VRAM
-Case has very little discoloration
-Needs stock drive sled, floppy bezel, and possibly a blank drive bay cover.
-I have 2 tape/zip drive bezels