Price check on setup

5 posts / 0 new
Last post
coius's picture
Offline
Last seen: 10 years 1 month ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
Price check on setup

ok, for a while now, I have been posting on my AIO and how cool it is. How much would a setup like this be worth:

PM G3 AIO with a 458Mhz CPU with 512K L2 cache
DVD Rom internal Drive.
2HDD's (1 original 4GB Drive, and one 11GB drive (11GB is main)
256MBs ram.
Zip 650 4x4x8x USB 1.1 CD-RW
StyleWriter II with new cartidge
Quicktake 150
All cables, and the internal IDE Cables were replaced with 80-wire cables
Floppy drive (of course!)
Very few scratches and scuffs
USB 2.0 5-port (4 external/1 internal) Card
D-Link 10/100 Card
6MB VRAM (maxed)
External SCSI Zip drive with a crap load of disks.
all the cables,
I also have tiger installed on it, but they would have to get the liscense themselves.
There might be some extras too

coius's picture
Offline
Last seen: 10 years 1 month ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
oops!

forgot to add, it's got an ADB Keyboard, and ADB Kensington 2-button trackball mouse

Oops! forgot, it's got a Rev C rom, and a Rev 2 board

madmax_2069's picture
Offline
Last seen: 13 years 5 months ago
Joined: Sep 24 2005 - 07:28
Posts: 664
i would love to see what it i

i would love to see what it is worth. cause i to have a AIO ive been upgrading i have a bit more in some area's and a bit less in other's

BTW how is tiger working on your AIO and what version of xpostfacto did you use cause ive had nothing but problems running tiger on mine. like some times the internal monitor will go black and tiger will lockup. i have a rev 2 logic board with the rage pro onboard with the 4mb upgrade vram chip and a rev b rom.

and another problem is tiger would not mount any cd's or dvd's when i would put them in. the only way i could get them to mount was to reboot with a cd or dvd in the drive but it would only work for about 20 minutes then would stop working till i reboot with the cd or dvd in the drive.

it works flawlessy with 10.2.8 no problems cept jag being slower than tiger.
my system is a Beige G3 AIO
stock G3 266mhz cpu
448mb ram 1x 256, 1x 128, 1x 64,
120gb hdd
Pioneer DVR-110D
replaced old stock ide cables with 80 wire Ultea ATA/133 IDE cables
ATI radion 7000 Mac Edition PCI 32mb DDR
rage pro onboard with 6mb vram
OS 9.2.2 and OS X 10.2.8
dual monitor's running in extended desktop

so far its doing goot and all coming togeather

coius's picture
Offline
Last seen: 10 years 1 month ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
I bet yours is worth more

yours is worth more than mine. You probably have about 4-500 in yours. I was thinking along the lines of 100-170 for mine. especially with the DVD drive. I used the most recent version of xposfacto, but I think the problem is that you need the Rev. C rom for it to work better. I had little problems with it, unless I made a speed adjustment. Which was a PITA to get it working. But all I had to do was boot into OS 9 and reinstall the Kext drivers to make 10.4 to boot.

madmax_2069's picture
Offline
Last seen: 13 years 5 months ago
Joined: Sep 24 2005 - 07:28
Posts: 664
so far ive put around to $200

so far ive put around to $200 USD in mine. ive herd that some times the beta version's work better than the latest version did on some beige G3's. i just with i could get tiger to work good. im also buying a USB2.0/firewire card that dont work good with the rev c rom i think its the sonnet tango 2.0

also i forgot to add it dont have the zip drive
and it has the A/V wings personality card

Log in or register to post comments