Adding A SCSI Hard Drive Greater Than 40mb To A Mac Plus

4 posts / 0 new
Last post
Offline
Last seen: 7 years 8 months ago
Joined: Jun 8 2004 - 15:14
Adding A SCSI Hard Drive Greater Than 40mb To A Mac Plus

Hi all. I was wondering how to add a SCSI hard drive greater than 40mb to a

Mac Plus. I wanted to get a hard drive, but I don't know how I'm supposed to

format it to the special interleave because the SCSI port is slower. Could

anybody help me? I would really appreciate any help. Thanks once again for

reading my forum topic.

Barjack's picture
Offline
Last seen: 10 years 6 months ago
Joined: Jun 8 2004 - 15:14
Apple HD-SC setup should perf

Apple HD-SC setup should perform this action- for some reason the Mac Plus works happier on SCSI ID=0. If this seems to cause issues, the application "Silverliner" (Silverlining?) by LaCie (free download from most older Mac sites) works well and puts itself on the boot sector of the drive to auto-initiate the hard drive when it turns on. I have a 100 MB hard drive that runs perfectly on a Mac Plus, having formatted it using Apple HD-SC setup with no issues.

sourapple's picture
Offline
Last seen: 10 years 3 weeks ago
Joined: May 27 2004 - 02:42
system 6 or 7 will support up

system 6 or 7 will support up to a 2.1gb. I got a 2gig in my classic. along with a 40, and a 20 external. if you wanna purchase the external contact me.

The Czar's picture
Offline
Last seen: 7 years 3 months ago
Joined: Dec 20 2003 - 10:38
Interleave Settings

Make sure to set the interleave to 3:1, otherwise the Plus won't be able to keep up to the drive.

Cheers,

The Czar

Log in or register to post comments