I have a situation here I need help with. Quick background: I recently recovered my childhood Apple 2e Enhanced from my parents and it worked - I was thrilled, discovered a thriving Apple II enthusiast community and a bunch of innovative people making cool devices for the vintage computers.
Apple IIe Enhanced 128k 607-187 Motherboard
Aux slot - 80 column card
slot 3 - Uthernet II (a2RetroSysyems.com)
slot 5 - FastChip //e (a2heaven.com)
slot 6 - Yellowstone Universal Disk card (BigMessOWires.com)
slot 7 - AllVGAS VGA scaler (a2heaven.com)
Also : Power supply from ReactiveMicro.com and his 12 inch color LCD through composite video - so I had 2 monitors connected - 1 through VGA and 1 composite video
My source for software is the FloppyEMU floppy disk emulator from BigMessOWires.com
Everything was working until yesterday when I went to move some cards around because I was having some odd behavior with the FastChip on boot when it was disabled (I disabled it when not using because it caused some software I had to glitch) - I had to remove jumper wires connected to LS166, IOU and S10 for the VGA scaler and it was difficult getting them off the pins. Now my Apple II only boots to a prompt. It will not access a drive. I've removed everything and kept in only the original Disk II card and 80 column card - tried multiple slots and nothing- straight to a prompt. Built in system test says system ok (ctrl-both apples-reset). PR#6 just hangs. I have no idea what else to try - praying this isn't a nostalgic paper weight now. Any advice would be greatly appreciated. Thanks!