Ultra 160 LVD/SE problems

11 posts / 0 new
Last post
Hokusai's picture
Offline
Last seen: 20 hours 52 min ago
Joined: Dec 20 2003 - 10:38
Posts: 256
Ultra 160 LVD/SE problems

Well, my dad recently acquired a Adaptec 3960D Ultra160 PCI Controller card. It also came with a SCSI drive for it.

The problem is that I can't get it to load or even recognize the drive. When there are no drives connected to the card, it shows up as two SCSI busses in System Profiles. But, when I connect up the hard drive, it only shows as one SCSI bus and no hard drive. I even looked in the system log and there were some interesting mentions of Adaptec in it:

Dec 4 16:45:13 localhost kernel: Adaptec warning: Resetting SCSI bus.
Dec 4 16:45:13 localhost kernel: ADB present:4
Dec 4 16:45:13 localhost kernel: Got boot device = IOService:/GossamerPE/pci@80000000/AppleGracklePCI/pci-bridge@D/IOPCI2PCIBridge/pci-ata@1/CMD646Root/ata-4@0/CMD646ATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/WDC WD1200JB-00GVA0 Media/IOApplePartitionScheme/untitled@6
Dec 4 16:45:13 localhost kernel: BSD root: disk0s6, major 14, minor 6
Dec 4 16:45:13 localhost kernel: Adaptec warning: SCSI Parity Error
Dec 4 16:45:13 localhost kernel: Adaptec error: PAL_handle_scsi_parity_interrupt: Couldn't send INITIATOR DETECTED ERROR
Dec 4 16:45:13 localhost kernel: Adaptec CARD DISABLED because of unrecoverable error!
Dec 4 16:45:13 localhost kernel: Adaptec warning: Resetting SCSI bus.

Is there anyone out there that can help me? I don't remember SCSI being this hard.

coius's picture
Offline
Last seen: 10 years 2 weeks ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
first...

Does the Hard drive work in another machine? It could be that the Drive controller went out and is shorting out or disabling the bus it is connected to.

Hokusai's picture
Offline
Last seen: 20 hours 52 min ago
Joined: Dec 20 2003 - 10:38
Posts: 256
Hmm...

I don't have another machine that can run this type of SCSI hard drive. I can hopefully assume the card is not the case; since, it was sold as 'working'.

There are plenty of jumpers and such on the drive and thus plenty of settings. Perhaps I don't have them set correctly.

Offline
Last seen: 6 years 12 months ago
Joined: Dec 20 2003 - 10:38
Posts: 455
The drive just might be toast

The drive just might be toast. What kind of drive is it (detailed model number might be helpful) and what size? And if possible, what is the build date on the drive? Most high end scsi drives like those had 5 year warranties.

Also are you using an active terminator at the end of the chain?

Hokusai's picture
Offline
Last seen: 20 hours 52 min ago
Joined: Dec 20 2003 - 10:38
Posts: 256
Hmm...

The hard drive is a Seagate ST318203LW. Its about 17.5GB. After changing SCSI ids and switching to the other connector on the card, I'm starting to wonder if this hard drive is actually dead. I'm pretty sure it came with a warranty that runs out in January 2005. The drive does make a 'clunk' sound every now and then.

Yes, there is an active terminator at the end of the scsi cable.

coius's picture
Offline
Last seen: 10 years 2 weeks ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
Uh Oh....

The drive does make a ‘clunk’ sound every now and then.

My friend, me believes that the Hard Drive IS deceased. Heck, it's probably has either a platter crash, or the head died. (my ibook hard drive, when the platter stopped spinning, the board on the Hard drve wasn't even recognized. ) my guess either the platter is toast, or the head is.

Offline
Last seen: 6 years 12 months ago
Joined: Dec 20 2003 - 10:38
Posts: 455
Re: Hmm...

The hard drive is a Seagate ST318203LW. Its about 17.5GB. After changing SCSI ids and switching to the other connector on the card, I'm starting to wonder if this hard drive is actually dead. I'm pretty sure it came with a warranty that runs out in January 2005. The drive does make a 'clunk' sound every now and then.

Yes, there is an active terminator at the end of the scsi cable.

If the drive is no longer being recognized by the adapatec scsi card and itmakes an odd clunking sound, then i concur that the drive is most likely dead.

Just call seagate, explain taht its not even being recognized by the scsi card and get an RMA and ship the dead drive back. Heck why not?, its sill under warranty.

Hokusai's picture
Offline
Last seen: 20 hours 52 min ago
Joined: Dec 20 2003 - 10:38
Posts: 256
Hmm...

Well, I got an RMA on it and I am shipping it back to them on Monday to hopefully get a good replacement in turn.

Offline
Last seen: 6 years 12 months ago
Joined: Dec 20 2003 - 10:38
Posts: 455
Sweet, good for you, let us k

Sweet, good for you, let us know how it works out.

I don't know if it would happen with scsi drives, but I remember in the old days (liek 3 or 4 or more years ago), when I would send in a drive to be rmaed, i would quite often get one bigger than i sent in.

however i think with scsi, they purposely keep them the same size (for compatiblity with raid controllers and arrays).

Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
"Back in the day" I bought a

"Back in the day" I bought a used 540mb Quantum ProDrive or something. This was back when 2GB was almost unheard of. It died on me after a few weeks, so I called up the fine folks in Milpitas (Quantums old headquarters) and got it RMA'd. Luckily it had *1* week left of the warranty. Did the "we mail you a box, you mail it back and we test it" deal, and got a box shipped back in a week ro so with a spiffy 840mb Maverick. That was a bottom end, but still in stock, probably a $150+ or so drive at the time. I think I paid $25 or so for the original ProDrive. :macos: My Amiga 2000 was never more fun before 3/4GB of storage. Acute

Offline
Last seen: 6 years 12 months ago
Joined: Dec 20 2003 - 10:38
Posts: 455
for a time period, i managed

for a time period, i managed to upgrade a few drives (like 2 gig maxtors) to around 6 or more gig in size via various rma cycles.

It was common for maxtor to send back a 6.4 gig drive instead of the 2 or 3 gig that you sent in for repair.

I wasn't complaining.

Log in or register to post comments