Apple IIe ver.B

8 posts / 0 new
Last post
Offline
Last seen: 5 days 11 hours ago
Joined: May 23 2025 - 14:37
Posts: 10
Apple IIe ver.B
I found the schematic in KiCad format on baldengineer's "bit-preserve Apple IIe" page on GitHub. Building on that, I started creating the printed circuit board. Here is the result.
Offline
Last seen: 5 days 11 hours ago
Joined: May 23 2025 - 14:37
Posts: 10
Modifications made to the source schematic diagram

A non-exhaustive list of errors identified on the schematic diagram (some errors are illustrated in the attached images):

1. The wiring of the J14 connector corresponds to the PCB,

2. Missing power lines: • UB1, 2, 3, 5 • UC10,12 • UD1,3 • UF5

3. Visual removal of unnecessary components from the PCB layout,

4. Adding the missing OE to the UF4 and connecting it to the corresponding pin of the UE5,

5. Correction of incorrect edge connector wiring,

6. Wiring of the UC1 (74S109) integrated circuit according to the original schematic diagram.

Offline
Last seen: 5 days 11 hours ago
Joined: May 23 2025 - 14:37
Posts: 10
01_adding missing power pins
Offline
Last seen: 5 days 11 hours ago
Joined: May 23 2025 - 14:37
Posts: 10
02_removed not needed parts
Offline
Last seen: 5 days 11 hours ago
Joined: May 23 2025 - 14:37
Posts: 10
03_Added missing OE to UF4
Offline
Last seen: 5 days 11 hours ago
Joined: May 23 2025 - 14:37
Posts: 10
04_on Conector wrong placed
Offline
Last seen: 5 days 11 hours ago
Joined: May 23 2025 - 14:37
Posts: 10
05_incorrect connetion.png
Offline
Last seen: 5 days 11 hours ago
Joined: May 23 2025 - 14:37
Posts: 10
06 corrected connection.png
Log in or register to post comments