Faking Sync-on-green

5 posts / 0 new
Last post
Offline
Last seen: 11 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 20
Faking Sync-on-green

Hey all...

I've been trying to make my radius TPD to work w/ my PC and so far, I've gotten this...

I made a 1BNC to HD15 adapter. Then I hooked it up to my PC only to find that the ATI Radeon 7000 card i have doesn't support sync-on-green. So, is there any way that I can use the composite sync line to generate a sync on green signal or should I just go back to using an older card (Artist Graphics NetVision 2500i) to drive the monitor.

~Nick

Offline
Last seen: 5 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 851
Yes, Griffin technology makes

Yes, Griffin technology makes one

http://www.griffintechnology.com/products/monitor_adapters/

Offline
Last seen: 11 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 20
Cool, I'll check it out when

Cool, I'll check it out when I have $40 to spare...

~Nick Beee

martakz's picture
Offline
Last seen: 12 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 634
£21 does not seem to bad....

£21 does not seem to bad....

Offline
Last seen: 17 years 8 months ago
Joined: Jan 28 2004 - 12:14
Posts: 60
If I understand it right,

If I understand it right, you are trying to attach a monitor that
can only do sync on green to a vga card.

If that's the case you only need a simple circuit to do it.

http://www.epanorama.net/circuits/sync_r.html

Log in or register to post comments