upgrade G4 466

7 posts / 0 new
Last post
Offline
Last seen: 19 years 1 month ago
Joined: Feb 9 2005 - 13:20
Posts: 5
upgrade G4 466

How hard is it to adapt later proc. cards for this motherboard? Can the dual 867 be adapted at all? thanks.

Offline
Last seen: 5 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 851
You'll need to supply power t

You'll need to supply power to it. Also the conenctor faces the wrong way.

Offline
Last seen: 19 years 1 month ago
Joined: Feb 9 2005 - 13:20
Posts: 5
dual 867?

Are you referring to the dual 867 or just QS cards in general. I know (I think) that MDD proc. cards can't be adapted to DA but I thought that the dual 867 might be an exception since it had a 133 system bus to begin with. (?)

Offline
Last seen: 5 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 851
I'm talking about all cards f

I'm talking about all cards from 733 to 1ghz. (except MMD obviously) The card is the same interface, but it's flipped around and hard to make fit right.

Offline
Last seen: 17 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 279
Re: I'm talking about all cards f

I'm talking about all cards from 733 to 1ghz. (except MMD obviously) The card is the same interface, but it's flipped around and hard to make fit right.

As far as I know they will plug in just fine (QS modules that is). All the CPU upgrades out there work for both systems, and if the connector was reversed, then obviously the CPU upgrades would differ from each other. I just looked at the different maker models, the sawtooth-QS2002 all use the same cpu model (just different PLL setting according to bus speed). The MDD upgrades are seperate as they are very different.

Jules's picture
Offline
Last seen: 18 years 10 months ago
Joined: Nov 17 2004 - 14:56
Posts: 10
3rd party is your best bet...

Personally, I think a 3rd party upgrade would be your best bet. Giga Designs (www.gigadesigns.com) have some great upgrades for the DA - right up to dual 1.7s!!

Offline
Last seen: 5 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 851
Re: I'm talking about all cards f

As far as I know they will plug in just fine (QS modules that is). All the CPU upgrades out there work for both systems, and if the connector was reversed, then obviously the CPU upgrades would differ from each other. I just looked at the different maker models, the sawtooth-QS2002 all use the same cpu model (just different PLL setting according to bus speed). The MDD upgrades are seperate as they are very different.

Yea that's what I've been saying repeatedly. It will plug in and work but you'll lose full length PCI access.

Log in or register to post comments