half-dead pismo, need some assistance

16 posts / 0 new
Last post
Offline
Last seen: 3 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 49
half-dead pismo, need some assistance

So I bought this used Pismo off of eBay. The guy said it had a bad motherboard (diagnosed by a local, non-apple-affiliated technician) and included a replacement. He was right that the unit would not respond at all with the old motherboard so I installed the new one. Now when I hit the power key very little happens. The screen does not turn on and the hard drive does not spin up (known good drive). When you push the caps lock and number lock keys though, they both light up. Then if you hold the power key for 10 secs and try again they don't, so the unit is turning on, but not doing much beyond that.

Any advice as to what the next step should be?

Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
Let it sit plugged in for a d

Let it sit plugged in for a day or two. You might even try that with the old mobo.

Offline
Last seen: 3 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 49
one more thing

When you hit the power key no sound eminates from either the on-board speakers or through the headphone jack...

Offline
Last seen: 3 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 49
from what i understand the ol

from what i understand the old mobo was working up until the day it stopped, so I'm not sure that would have helped. I had already left it plugged in for a day before i swapped it out. I'm thinking there might be a problem with the sound/plug board. I'll try letting it sit in the mean time...

Offline
Last seen: 3 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 49
two days later...

alright, it's been a little over 48 hours and nothing has changed. The only response to the power key is the keyboard (no screen, no hd, no speakers). Any more suggestions, or should i start looking for more service parts?

aladds's picture
Offline
Last seen: 1 month 2 days ago
Joined: Dec 26 2003 - 16:21
Posts: 298
Try this…

Ok, take everything out of the case and lay it out on a table or summit. Attach a keyboard and trackpad or mouse to it and an external monitor. Power the board and see what happens. If it works, start adding other items such as the screen.

Offline
Last seen: 3 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 49
Turns out the CPU card wasn't

Turns out the CPU card wasn't properly seated. Anyway, now it boots but I can't get it to load an OS. When I put in a Jaguar DVD it kernel panics, and it won't read any of the System CDs I have either. I booted it into Firewire disk mode and loaded 9.2.2 onto it, but it won't boot off of that now either, it gets an "address error" and tells me to boot with extensions off, but when I do it still doesn't boot correctly.

I know the drives that shipped with these are known to be flaky but does this sound like something more? I don't want to spend the money on a new drive if there's still another underlying problem.

Offline
Last seen: 15 years 1 month ago
Joined: Feb 10 2004 - 21:41
Posts: 208
Dunno... but on my Wallstreet it's 10.2

I have had problems with 10.2.4 and newer on my Wallstreet. Whenever I have to install, I have to use the 10.2 (.nothing) release CD and have to hold C to get it to boot that way.

Offline
Last seen: 3 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 49
Well it won't boot off of any

Well it won't boot off of any CD (OS 9, etc.). As it turns out this is what it was doing for the previous owner too, so the motherboard swap did not fix the problem. It wouldn't boot off of the installed OS for him even though it had previously been working. He was told that either the motherboard or the processor card was the problem.

I have posted several want-ads for a processor card, but before I spend the money I want to know if this is even a reasonable diagnosis. Everything else seems to funcion, it just refuses to boot anything.

Offline
Last seen: 7 years 8 months ago
Joined: Mar 19 2005 - 22:24
Posts: 89
I suggest swapping the RAM out before you pay for a CPU card.

n/t

Offline
Last seen: 3 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 49
that was it. can't believe t

that was it. can't believe that didn't occur to me. Thanks a ton.

Offline
Last seen: 7 years 8 months ago
Joined: Mar 19 2005 - 22:24
Posts: 89
No prob.

I used to work as a Mac tech for a living, and I did PowerBooks pretty much exclusively for about a year. I developed a "sense" for these things. Let me know if you have any other questions.

Offline
Last seen: 3 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 49
yeah, ironically i just finis

yeah, ironically i just finished the training for apple portables and i've been doing this for the last 3 years or so. in any case, thanks again.

moosemanmoo's picture
Offline
Last seen: 9 years 3 months ago
Joined: Aug 17 2004 - 15:24
Posts: 686
For future reference, Macs ar

For future reference, Macs are the most RAM-picky computers I have ever seen. If anything at all is wrong with the ram, it will either refuse to work or work very well and crash horribly in the middle of a big project.

Offline
Last seen: 15 years 1 month ago
Joined: Feb 10 2004 - 21:41
Posts: 208
You haven't seen an RS/6000 Then...

RS/6000's are worse. Mine requires oddball parity RAM. ???

Although, it IS still a PowerPC processor...

Offline
Last seen: 7 years 8 months ago
Joined: Mar 19 2005 - 22:24
Posts: 89
You think _that`s_ oddball RAM?

Try a Mac IIfx on for size.

IIRC, they use 60-pin SIMMs. AFAIK, those were made specifically and especially for that machine.

Log in or register to post comments