The display utility that a user sent me worked like a charm, I was able to "stretch" the screen to the viewable area and adjust various settings, but it still has issues. When I first boot the machine up, the display is really dark and barely readable in a lighted room (like a room in the daytime). At night it isnt much better but still viewable. Eventually it slowly gets brighter to where it should be while still going dark on occasion until it warms up. The next issue is the dimensions of the screen. Even with it adjusted, the image snaps into a wierd position, that being narrow and tall (tall and skinny?), then wiggles its way back to where it was (literally, its freaky!). Do I have a loose connection or is the analog board about to die? Also, are these somewhat easy to find or should I move the board into an ATX or even a beige tower or desktop case?