How to make a DOS Boot disk for my apple IIe

15 posts / 0 new
Last post
Offline
Last seen: 2 months 3 weeks ago
Joined: Aug 22 2005 - 10:32
Posts: 404
How to make a DOS Boot disk for my apple IIe

I have an apple iie platinum that I got from a school. It works fine but by the time I found it and asked they had thrown away the old 5.25" DOS disks, and games. Now my question is: How can I make either a ProDos, or Dos 3.3 bootdisk without an existing one. All I have is the .dsk image. I do have a 5.25" FDD in my Wintel PC but im not sure if i would be able to make the disks with that.

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Nope. . . those aren't compatible drives. . . .

The PC drive hardware isn't compatible with the Apple II drive hardware. It's easiest to start with an actual disk with the DOS or ProDOS on it and copy the format. The ProDOS System Master Disk is a functional way to deal with this.

Mutant Pie

littlejohn's picture
Offline
Last seen: 1 year 3 months ago
Joined: May 18 2005 - 13:11
Posts: 114
Start here....

ADT is where you will have to start. Go to this link...

http://www.apple2.org.za/gswv/a2zine/Sel/ADTWin.html

Download ADT.

Then go here...

http://home.swbell.net/rubywand/Csa2T1TCOM.html#001

And read everything. Then the world of Apple .DSK images on the web is open to you. Enjoy....

Offline
Last seen: 2 months 3 weeks ago
Joined: Aug 22 2005 - 10:32
Posts: 404
but dont those all require me

but dont those all require me to have a pre-existing Prodos or Dos 3.3 disk?(which i dont have). If i missed something please tell me.

6502enhanced's picture
Offline
Last seen: 1 year 11 months ago
Joined: Feb 23 2006 - 02:24
Posts: 281
Hallo, with a programm lik

Hallo,

with a programm like CiderPress or the AppleCommander you can "copy" the Hex of a dos and "paste" it to HyperTerminal, that is connected with the apple II ...

Must be the same way transfer the ADT-Hex ...

Maybe someone knows more about the monitor-programming than me and can help you moreover ...

Greetings

littlejohn's picture
Offline
Last seen: 1 year 3 months ago
Joined: May 18 2005 - 13:11
Posts: 114
Once again....

Once you have the serial cable hooked up you transfer the "ADT_ss.dmp" program. Then you can use the ADT program to transfer .DSK files.
Read all of the readme files, all the answers are there.

6502enhanced's picture
Offline
Last seen: 1 year 11 months ago
Joined: Feb 23 2006 - 02:24
Posts: 281
I thought you have to have a

I thought you have to have a dos where you can save the ADT dump - isn't it ???

Greetings

Offline
Last seen: 9 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 149
The ADT dump creats dos on th

The ADT dump creats dos on the floppy when you transfer over a dos image

Offline
Last seen: 2 months 3 weeks ago
Joined: Aug 22 2005 - 10:32
Posts: 404
Do i have to use a null modem adapter?

i've got a parallel crosover cable that's used for transfering files between two PCs via Direct Cable Connection. I think i could but i'm just making sure. and a side question can i use an atari or c64 joystick with the apple II

Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
A parallel link cable is abso

A parallel link cable is absolutely not the same thing as a null modem cable. Wink See the Wikipedia page for DCC. A null modem cable only needs 3 wires to work, though more are needed to do hardware handshaking.

Offline
Last seen: 2 months 3 weeks ago
Joined: Aug 22 2005 - 10:32
Posts: 404
so is that a yes? indicated b

so is that a yes? indicated by the Wink . Or is it a no

Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
That's a no. I put the wink

That's a no. I put the wink in to show I wasn't trying to be harsh with the "asolutely not" bit. A parallel LapLink cable: http://www.nullmodem.com/LapLink.htm
A serial null modem/laplink cable: http://www.nullmodem.com/NullModem.htm

You only need to use TD RD and SG for a serial line. For null modem use you swap TD and RD between the machines. Then you hook up the handshake lines as needed by the software or hardware.

Offline
Last seen: 2 months 3 weeks ago
Joined: Aug 22 2005 - 10:32
Posts: 404
none of my PCs have parallel

none of my PCs have parallel or serial ports, is it possible to do disk trasfers with my powerbook 5300cs? i have the cable for it, but the only place i'm able to find macADT is the Asimov FTP archive, and the sit file is corrupted.

Offline
Last seen: 8 years 4 months ago
Joined: Apr 10 2006 - 20:01
Posts: 1013
Bootstrapping and transfers via audio links

none of my PCs have parallel or serial ports, is it possible to do disk trasfers with my powerbook 5300cs?

For posterity's sake... the ADTPro project can bootstrap a bare-metal Apple and transfer disk images over audio/cassette ports:
http://adtpro.sourceforge.net

Log in or register to post comments