G3 iMac blueberry hard drive problems

9 posts / 0 new
Last post
Offline
Last seen: 13 years 9 months ago
Joined: Feb 15 2007 - 03:49
Posts: 66
G3 iMac blueberry hard drive problems

So I recently tried to upgrade my iMac's hard drive. I checked for compatability at macworld, bought a 40GB HD, followed the directions and installed it. WHile doing this, one of my RAM slots was broken, horribly dangling askew, with bent pins all over the place. I put the remaining working RAM in the top slot, and reassembled. When I power up, I get a beeping noise and flashing led light. My question is; did I mess up the logic board or whatever when I broke the RAM slot, or is my drive incompatable/improperly installed?

themike's picture
Offline
Last seen: 12 years 4 months ago
Joined: Jul 21 2004 - 19:33
Posts: 455
Are any of the bent pins touc

Are any of the bent pins touching each other? That may cause a problem. If the slot is broken, but the pins are not touching, there is probably something else wrong. What setting did you use on the drive? IIRC, iMacs like to have the "cable select" or CS setting.

Offline
Last seen: 16 years 6 months ago
Joined: Jun 18 2005 - 14:52
Posts: 195
Beeping usually means a RAM i

Beeping usually means a RAM issue.
A HD will simply not mount.
The daughter card for those machines are inexpensive.
Don't loose any sleep over it.
I think I have a spare 333 unit here...

Dave

Offline
Last seen: 13 years 9 months ago
Joined: Feb 15 2007 - 03:49
Posts: 66
yeah the pins are definitely

yeah the pins are definitely touching, itried to sort of smash it back down so it didnt hang up on anything. oops. so my new question is; How hard is it to replace the logic board, and WTF is a daughter card? is that easier to replace than the whole LoBo?

Offline
Last seen: 16 years 6 months ago
Joined: Jun 18 2005 - 14:52
Posts: 195
The Daughter card is the smal

The Daughter card is the small 3"x4" card that the RAM slots and the processor are mounted. ( Easy to remove/replace ).
The Motherboard or Logicboard is the large circitboard which the smaller Daughtercard
installs or seats onto. ( Not nearly as easy to remove/replace, many more screws and connections)
There are manuals and how-to's available on the net.

Dave

Offline
Last seen: 13 years 9 months ago
Joined: Feb 15 2007 - 03:49
Posts: 66
Thanks for clarifying. One m

Thanks for clarifying. One more question;
how do I get the cd out of the slot loading drive?

Offline
Last seen: 16 years 6 months ago
Joined: Jun 18 2005 - 14:52
Posts: 195
Slot Loader ?

Thanks for clarifying. One more question;
how do I get the cd out of the slot loading drive?

If it is a Slot Loading Imac please disregard my post.

Offline
Last seen: 13 years 9 months ago
Joined: Feb 15 2007 - 03:49
Posts: 66
so then you cannot replace th

so then you cannot replace the daughter card in this slot loader?

also my OSX CD is still in the drive, how do I get it out?

Offline
Last seen: 16 years 6 months ago
Joined: Jun 18 2005 - 14:52
Posts: 195
Look here...http://forums.m

Look here...
http://forums.macrumors.com/archive/index.php/t-2008.html
And here
http://manuals.web39.silverline-s16.de/

I hope that helps,
Dave

Log in or register to post comments