QS dual 1ghz processor in DA G4?

9 posts / 0 new
Last post
Hawaii Cruiser's picture
Offline
Last seen: 7 years 3 weeks ago
Joined: Jan 20 2005 - 16:03
Posts: 1433
QS dual 1ghz processor in DA G4?

I picked up a non-working 2002 Quicksilver G4 for fairly cheap. It has basically the same symptoms as described in alk's AF thread, and it pretty much seems to be a bad power supply. It's interesting. When I hook up a CD drive to the power connectors on the end of the line it doesn't power on, but when I hook it up to the connector on the middle of the line, it does. The harddrives, on the other hand, sometimes do, sometimes don't. I haven't gotten any video out from the machine, although the fans run and the motherboard's red led comes on. No heat comes off the processor. I tried it's Nvidia 64mb AGP video card in my wife's Digital Audio G4 and the machine boots but the apple and sprocket are light yellow-green, and the desktop comes up light yellow-green also, and then there's a kernel panic. One of the SCSI harddrives I have in her DA also starts failing when the Nvidia card is in the machine. I tried the Rage 128 card from the DA in the QS but still no boot or video out (I also tried a Rage 128 PCI card and nothing). I put the Rage back in the DA and everything's fine there again, thank goodness. So I guess the Nvidia card is bad too (shucks). The QS came with three sticks of PC100 (stupid is as stupid does), so I tried some PC133 that I know is good but still no boot.

QS PSU's are still very pricey (I can't test the QS with the DA PSU, right?), so I'm wondering how difficult it would be to put the dual 1Ghz processor in the Digital Audio for the time being. Has anyone else tried it? Both systems are 133mhz and it sounds like it will work. Of course, I'm also now worried that the dual processor may be screwed up and if there would be any danger to the DA if I did. But if anyone has any advice or suggestions, I'd appreciate it? thanks in advance

eeun's picture
Offline
Last seen: 1 year 1 day ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
It's certainly worth trying.

It's certainly worth trying. I was wandering through links last night on the same subject, and did see one reference that only the 733 CPU would work, but then saw that directly contradicted. :/

The PSUs are different by one wire, as outlined here. Wouldn't take much to change that one wire, but do you really want to introduce a potentially very bad PSU to your working DA?

If you follow links from Alk's thread, you could adapt an ATX PSU to try on the MDD G4, and you'll also see notes on the 12V lug connection for trying the MDD CPU in the DA system.

Offline
Last seen: 14 years 11 months ago
Joined: May 29 2005 - 22:35
Posts: 284
QS cpu in a DA MLB

I am currently running a QS 867MHz cpu in a DA MLB and using the DA power supply. I did have to use the 12Volt modifcation on the 4th lug in order for the CPU to power up. It works with out issues and the cpu speed is correct as both the DA and QS have the 133 buss.

In reading your post on the QS my guess would be a bad power supply that took out the video card/MLB when it went. However the CPU may still be good. All you can do is try it. It will either boot or it won't boot or it may boot up and then freeze up the system.

I may be wrong here but I believe that the DA and up MLB's will support Dual cpu's with out issues. All you can do is try

Hawaii Cruiser's picture
Offline
Last seen: 7 years 3 weeks ago
Joined: Jan 20 2005 - 16:03
Posts: 1433
Yeah, maybe I should try to g

Yeah, maybe I should try to get or make a PSU for the Quicksilver instead of trying the double gig in the DA. Lots more to gain that way, and too much to risk the other way. Here's another page with QS, MDD, and DA PSU pinouts:
http://www.xlr8yourmac.com/tips/MDD_ps_mods/MDD_PS_Mods.html

And here's for the Sawtooth and the ATX:
http://www.xlr8yourmac.com/systems/ATX_G4_AGP_conversion/G4_AGP_to_ATX_case_pg2.htm

Hawaii Cruiser's picture
Offline
Last seen: 7 years 3 weeks ago
Joined: Jan 20 2005 - 16:03
Posts: 1433
Well, I just went back and re

Well, I just went back and read more carefully alk's thread that I linked to above, and this time followed the link he provided in his thread to his other thread about his MDD Power Supply Conversion and frankenmac 8600 project. At the bottom of that other thread he states emphatically that he has a QS dual 1Ghz running fine on his DA board which he put into his 8600 case and counters warnings by others about attempting the upgrade.

Still yet, I think I'm going to pursue getting a working QS PSU instead. This is an interesting link I gleaned from that thread along the ATX conversion idea: converted ATX kit for Mac DA and QS G4's
It includes an external 24v PSU for the ADC power line. Click on the pic of the ATX PSU for pics of the accessories.

alk
alk's picture
Offline
Last seen: 2 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 369
I'll swear up and down that i

Regarding a QuickSilver CPU in a Digital Audio G4, I swear up and down that it works perfectly (though you might want to work out some sort of heatsink fan - the dualie G4 is HOT). The only modification needed is to hook up a 12 V line to the 4th post on the CPU card. It's VERY easy to do. This works with cards of all speeds from 733 MHz to dual 1 GHz G4s. I've done it personally with an 800 MHz card, an 867 MHz card, a 933 MHz card, and a dual 1 GHz card.

I can probably take detailed pics if you want them.

Anybody else who calls me a liar better be prepared to take a smackdown. Wink

Peace,
Drew

Hawaii Cruiser's picture
Offline
Last seen: 7 years 3 weeks ago
Joined: Jan 20 2005 - 16:03
Posts: 1433
my understatement

I said Quicksilver PSU's are still very pricey. I was watching this auction:
Quicksilver PSU auction
Sometimes when you think you've got a grasp on the world, something you see just blows you away. What a happy seller.

alk
alk's picture
Offline
Last seen: 2 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 369
That's insane. DA PSUs wil

That's insane.

DA PSUs will fit in a QuickSilver, but of course they don't have the extra pins for the QuickSilver MB. I'm pretty sure you can run a QuickSilver without those extra lines (they're just 12 V lines, and I think they go to the CPU) if you do the 12 V line "hack" to apply power directly to the fourth CPU post.

MDD PSUs can also be made to work, and they are much cheaper. They aren't a drop-in replacement, though, as they are a different size and shape. A little creative casework and mounting will make it fit, though.

You can also go the ATX route. That's a little different as the ATX supplies don't put out the 28 V line for ADC display support. You can always just tie a 5 V or other line to that, though.

Peace,
Drew

Offline
Last seen: 14 years 1 week ago
Joined: Feb 19 2007 - 08:21
Posts: 21
Yes, you can

Yes, you can put a Quicksilver CPU into a Digital Audio but you have to pull an additional 12 volt line from the PSU. There are details of the mod in many places. Google is your friend. That is the very nice thing about the Digital Audio, and the main reason I recommend them over all other machines in the G4 tower line is that you can use any Quicksilver CPU and aftermarket upgrades are designed to work in both. You don't have to mod the aftermarket parts, though. You won't get the 167mhz bus of the faster MDD/FW800 models, but you can get the ports that they have that the DA doesn't by way of expansion cards and the 133 mhz bus isn't exactly slow in this class. The memory is also cheaper for the QS/DA than the later models. The later models also suffer a deficiency in aftermarket upgrades for some reason, so you can crank up the speed on a QS/DA higher than the MDD/FW800. I also favor the appearance of the first several generations of G4 prior to the QS, but that's entirely down to personal taste.

Log in or register to post comments