Linksys...

7 posts / 0 new
Last post
Offline
Last seen: 16 years 2 months ago
Joined: Dec 20 2003 - 10:38
Posts: 44
Linksys...

My web server (lombard 333) was damaged in the lightning strike, and the ethernet port no longer works. i was able to find a cardbus ethernet card laying around. It is a linksys pcmpc100 v3 Etherfast 10/100 card. Are there mac drivers available? I googled to np avail.... I am not very good at searching. Before i waste more of my life, Could any of you point me in a general direction? Thanks
Brendan Aka Toehead

Dr. Webster's picture
Offline
Last seen: 10 hours 54 min ago
Joined: Dec 19 2003 - 17:34
Posts: 1760
Have you tried installing it

Have you tried installing it anyway? Some PCI Ethernet cards can use Apple's drivers.

Offline
Last seen: 16 years 2 months ago
Joined: Dec 20 2003 - 10:38
Posts: 44
I installed it, and it shows

I installed it, and it shows up on the menu bar. It doesn't show up under network in t the system preferences, and it doesn't replace built in ethernet either, becuase it still doesn't work with that option.

rael9's picture
Offline
Last seen: 3 years 8 months ago
Joined: Dec 26 2003 - 16:21
Posts: 216
What OS

What OS are you running? 10.2, 10.3 or 9.x?

Offline
Last seen: 8 years 7 months ago
Joined: Dec 20 2003 - 10:38
Posts: 211
If using OS X, try installing

If using OS X, try installing the Developer tools (slow download from Apple) and run IORegistryExplorer which should report plug and play data for the device. You'll then need to identify the card and locate a similar supported device so that you can hack the associated Plist files. Sorry for lack of detail but there should be enough info for you to Google for similar hacks.

Phil

Offline
Last seen: 16 years 2 months ago
Joined: Dec 20 2003 - 10:38
Posts: 44
I'm using OS X 10.3. I'll try

I'm using OS X 10.3. I'll try the developer tools thing when i get my laptop back from the repair place (insurance company wanted a quote)

rael9's picture
Offline
Last seen: 3 years 8 months ago
Joined: Dec 26 2003 - 16:21
Posts: 216
Try this first

Go to 'System Preferences.'
Click on 'Network.'
Choose 'Network Port Configurations' from the 'Show' dropdown menu.
See if there is a listing for your LinkSys.
If so, make sure it has a check next to it.

If it didn't have the check, then checking it will probably solve your problem.

Log in or register to post comments