imac special internal ide

6 posts / 0 new
Last post
MaxTek's picture
Offline
Last seen: 2 years 4 days ago
Joined: Dec 20 2003 - 10:38
Posts: 702
imac special internal ide

What this guy is explaining...is it true?

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5108489562&ssPageName=ADME:B:SS:US:1

Thanks for your help.>

Barjack's picture
Offline
Last seen: 16 years 10 months ago
Joined: Jun 8 2004 - 15:14
Posts: 30
Yes, you can do this... altho

Yes, you can do this... although it is kinda ghetto.

The iMac 350, DV and other CRT models that have slot-loading drives are set up REALLY weird with their IDE devices. The motherboard has a SCSI-looking-but-not-actually-SCSI connector on it, that goes to a 50-pin plug on the laptop-style slot-loading drive (laptop style as in the tiny, skinny drive you'd see in a laptop). After this, 10 of the the wires just DISSAPEAR and the remaining 40 wires are turned into an IDE cable and passed to the IDE hard drive.

This is set-up oddly for a reason. The laptop-style optical drive on an iMac is sent both data and power through the cable- the extra 10 pins simply send a power source to the drive's adapter board. After this, the continuing IDE signal is sent to the hard drive. Such a cable is made using a standard 50-pin SCSI cable cut up and modified with an IDE plug at the end. If you CD drive dies, you *COULD* use this cable to run a generic CD-ROM, but you'd have the leave the bottom of your iMac open on the table, and even then you'd need to find a way to power said CD-ROM.

These cables are more useful for someone who is doing a case-mod to make their iMac into a tower computer and wants to use a real 5.25" CD-ROM drive from a PC... kind of a cool idea, but this guy markets it in an odd fashion.

MaxTek's picture
Offline
Last seen: 2 years 4 days ago
Joined: Dec 20 2003 - 10:38
Posts: 702
Thank you for the very inform

Thank you for the very informative reply. I appreciate it!

MaxTek

doug-doug the mighty's picture
Offline
Last seen: 2 days 3 hours ago
Joined: Apr 14 2004 - 17:52
Posts: 1401
I don't get it...

A few months back, I went to CompUSA and bought a standard IDE cable with two ports. I replaced the IDE connector for my hard drive. I ran the cable outside of the case and hooked up two IDE hard drives. Everything worked fine.

Is this guy saying that his cable plugs into the CD IDE slot, or what. I am confused...

--DDTM

Eudimorphodon's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: Dec 21 2003 - 14:14
Posts: 1207
Re: I don't get it...

A few months back, I went to CompUSA and bought a standard IDE cable with two ports. I replaced the IDE connector for my hard drive. I ran the cable outside of the case and hooked up two IDE hard drives. Everything worked fine.

Is this guy saying that his cable plugs into the CD IDE slot, or what. I am confused...

The motherboard and IDE layout of the "Slot-loading" iMacs is completely different compared to the "tray-loading" ones.

--Peace

doug-doug the mighty's picture
Offline
Last seen: 2 days 3 hours ago
Joined: Apr 14 2004 - 17:52
Posts: 1401
ahh...

gotcha

Log in or register to post comments