Printing mailing labels

4 posts / 0 new
Last post
Offline
Last seen: 5 years 9 months ago
Joined: Jun 11 2008 - 17:16
Posts: 8
Printing mailing labels

When I owned a Brother Word Processor in the 1990s, I was able to make a page of return address labels, simply by asking the machine to print my address thirty times on a page of labels.

How does one do this with an Apple IIGS, using AppleWorksGS? I have had a devil of a time figuring this out. I have both an ImageWriter II printer (continuous fee labels) and a StyleWriter (label pages.)

Help!

Thank you in advance,

Mike

gsmcten's picture
Offline
Last seen: 5 years 8 months ago
Joined: Oct 4 2005 - 18:52
Posts: 2629
Printing Mailing Labels

Mike,

You're going to have to search the Appleworks manual and the Imagewriter II manual for Page Setup. It's been 20 years since I've done anything like this, but I do remember finding the answer in one of the two books.

Good Luck,

Steven (gsmcten)

"Apple II... It's ALIVE!!!"

Offline
Last seen: 3 weeks 4 days ago
Joined: Dec 13 2005 - 08:40
Posts: 265
For more then one label and t

For more then one label and the same one over and over. I would recomend the program "Labels, Labels, Labels,"

It was easy to use on the Apple II/IIgs, and the ImageWriterII. You could adjust the spacing for your labels. After printing a 100 or so they would off. You could make very fine adjustments. Add Icons to them as well.

Should be on a few sites to D/L.

I am sure there are as well.

Take Care

Offline
Last seen: 3 weeks 4 days ago
Joined: Dec 13 2005 - 08:40
Posts: 265
Hi, Adress For Sucess was a

Hi,
Adress For Sucess was a IIgs one. Send ne a PM when you get a chance.

Take Care

Log in or register to post comments