PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

11 posts / 0 new
Last post
Offline
Last seen: 8 years 2 months ago
Joined: Apr 8 2014 - 15:59
Posts: 23
PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

I believe these are the correct make/model/vintage, if anyone is looking!

http://www.ebay.com/itm/6pcs-PHILIPS-22UF-22MFD-25V-85-C-ELEC-ALUM-AXIAL-CAPACITOR-4-5X10-5MM-/111294267239?pt=LH_DefaultDomain_0&hash=item19e9a7bf67

Offline
Last seen: 3 weeks 2 days ago
Joined: Oct 9 2011 - 12:54
Posts: 1352
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

From the pics on eBay. They don't look like the correct caps.

Offline
Last seen: 8 years 2 months ago
Joined: Apr 8 2014 - 15:59
Posts: 23
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

I thought the correct ones where the Phillips 22uf 25v 4.5mm x 10.5mm axial.. do you have the correct make/model info? Thanks!

Offline
Last seen: 3 weeks 2 days ago
Joined: Oct 9 2011 - 12:54
Posts: 1352
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

I don't recall the exact part number. It's not just size and manufacturer, but package and series you need. I think the last set I got was from a surplus place I went in person, but I had an original cap that was damaged from an Apple-1 with me to make sure it was the same.

There are modern ones that look pretty close and would be safer to use. I may have that part number also from an old mouser order. They aren't exact but they are close. I can look tomorrow.

Cheers,
Corey

Offline
Last seen: 2 months 3 weeks ago
Joined: Dec 13 2013 - 17:24
Posts: 20
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

Well, I made the mistake of purchasing this item thinking that they were correct for my Apple 1 replica. They were all bad, a few were open and the best were only about 10uf with very high ESR. They must be very old stock. Don't waste your money.

Dick Stachowiak
East Syracuse, NY

Offline
Last seen: 8 years 2 months ago
Joined: Apr 8 2014 - 15:59
Posts: 23
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

Here is a different set from Newton: http://www.ebay.com/itm/261723098836?_trksid=p2060778.m1438.l2650&ssPageName=STRK%3AMEBIDX%3AIT

Offline
Last seen: 1 month 3 days ago
Joined: Jun 5 2008 - 07:26
Posts: 475
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

Those are widely available - if you just want a part of the correct value, fit and the approximate color:

Vishay part number:MAL202138229E3

http://www.digikey.com/product-search/en?pv7=2&k=4068PHCT-ND&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25

regards,
Mike W.

GIULIOBIT's picture
Offline
Last seen: 2 years 10 months ago
Joined: Nov 27 2013 - 05:43
Posts: 14
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

Hi dear friends, i find this:

http://www.ebay.it/itm/Lot-de-5-condensateurs-chimiques-axial-22uF-40V-NEUF-/141302424171?pt=FR_YO_MaisonJardin_Bricolage_ElectroniqueComposants&hash=item20e647e26b#ht_772wt_1161

Dimension and colour are best for good replica

Best regards from Italy

Giuliano

Offline
Last seen: 2 years 4 months ago
Joined: Jan 1 2015 - 18:57
Posts: 47
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

What are the correct dimensions for the original small blue 22uf caps?

len

Offline
Last seen: 1 month 3 days ago
Joined: Jun 5 2008 - 07:26
Posts: 475
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

I suppose someone might have the official Philips data sheet, but I measure them as approximately 11mm x 6mm

Offline
Last seen: 2 years 4 months ago
Joined: Jan 1 2015 - 18:57
Posts: 47
Re: PHILIPS 22UF 25V AXIAL CAPACITOR 4.5X10.5MM

Thanks Mike,

I thought the 4.5mm looked a bit small in dia, but pretty close on the width.

Log in or register to post comments