Purchased an enhancement kit from ReactiveMicro. It is the US kit.
I also have the 80 col/64k card. On boot, the correct Apple \\e shows up. When I hit closed Command/Closed Apple/Reset I get multicolored squares instead of lines. I can also put in the PR#3 command and get 80 column text. When I boot into Proterm, ProDos, Agate, or Appleworks 3.0 I get the message: This program needs a 65c02 processor to run.
Reseated the 4 chips, still the same thing. If I run Appleworks 1.3 it says that I have 55k free, which means that the column card is working correctly with the ram expansion right?
Is there something I am missing?
Check the processor to see if it says 65C02 on it.
I am pretty sure I put it in, I'll double check when I get home
R65C02P4, it’s in there.