WTB: Vintage screws

15 posts / 0 new
Last post
Tom Owad's picture
Online
Last seen: 47 min 23 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
WTB: Vintage screws

qty 10: #10-24 machine screws, slotted, flat head, 1/2" length

qty 3: #6-32 machine screws, slotted, round head, 1/4" length

qty 20: #4-40 machine screws, slotted, round head, 1/2" length (or a little longer), plus nuts and maybe washers

 

I'm looking for vintage screws that will blend in for repairing 70's hardware. If you could check your coffee cans, I'd be grateful!

 

Edit: I forgot to mention I'm looking for steel.

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Finishes?

What are your preferred materials/colors for finish?  Nickle, chrome, matte black, brass, stainless?  When I know that I can check my inventory.

Tom Owad's picture
Online
Last seen: 47 min 23 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
Thanks, mutant. First photo

Thanks, mutant. First photo shows the #6 and #10. It looks to me like the #6 might be nickel. The #10 looks like plain steel.

 

 

I don't have of the #4's, but below is what I'd like to match. I thought they were just steel, also, although they look shiny in the photo. These are from an erector set (the other screws are from a TVT2 case).

 

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Looks Like...

They look like they are nickle and zinc coated (respectively from left-to-right) and holding together something like parts from an Erector Set.  I should have those.  I'll check and let you know.  

Tom Owad's picture
Online
Last seen: 47 min 23 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
Yes, for the #4s, I'm trying

Yes, for the #4s, I'm trying to match the erector set screws.

 

The #6 and #10's are for a homebrew TVT-II case. The #10's are quite visible. The #6's you'd actually only see if you opened it up.

Offline
Last seen: 3 years 9 months ago
Joined: Jun 10 2020 - 20:25
Posts: 1
I'm actually the guy who sold

I'm actually the guy who sold it, I found two of the screws doing some cleaning (the #10s I believe) I can drop them in an envelope if you want them.

Tom Owad's picture
Online
Last seen: 47 min 23 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
Thank you so much! Welcome!

Thank you so much! Welcome!

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Partial Success

Hi Tom,
I have:
-20pc 4-40 washers
-20pc 4-40 nuts
-I also have 20pc 4-40, slotted, steel, x 1/2" pan head (not what you asked for) screws

2 pcs 6-32 slotted, steel, round head (with slight rust patina) that are 1/2", but can be cut to 1/4"
-OR- a bunch of pan heads either 1/2", 3/8", or cut down to 1/4"

I only had one 10-24 slotted flat-head, and it's too long, modern finished, but I'll cut it down to 1/2" if you want it.

Also, if you are having trouble locally sourcing modern ones that you would accept (for these 6-32 or 10-24 sizes) I can buy and send them to you.

BTW I'm not charging you for the hardware or the shipping. I really appreciate what you do here with the 'Fritter. It's a small enough way of saying "thanks."

I thought I'd post a picture here, or send one by PM, but that seems to have gotten more difficult since you had the site down for servicing.

Tom Owad's picture
Online
Last seen: 47 min 23 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
That's really kind. Thank you

That's really kind. Thank you. I'll send you a private message.

The server maintenance was just minor updates that shouldn't have changed anything, and I haven't noticed anything different with regards to posting photos. Can you tell me more about what you're experiencing?

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Change on the AF functioning

Well, just last week I was posting pictures in PM's with TimeLord, very easily with the "media browser" function. I thought I'd post a picture of some other screw head options that I had for you here. There was a more involved procedure that is listed for that, so I thought I'd send you a PM with it instead. I went to do that, but the option to post a picture there seemed to have disappeared. I am running a MacBookPro 2.66 Intel Core 2 Duo, from 2009, with OSX 10.10.5.

Tom Owad's picture
Online
Last seen: 47 min 23 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
It looks like the default

It looks like the default filter got changed from HTML to BBCode. I've changed it back. Everything looking back to normal, now?

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Almost...
almost… The default is still BBC, however HTML is an option and I was able to select it and once again get the Media Browser option for a quickly and easily loading the following picture:

 

Tom Owad's picture
Online
Last seen: 47 min 23 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
It looks like something reset

It looks like something reset the format order again. I'll dig into it.

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Screw Picture

At least you get to see the (upside-down) picture of a variety of screws that are near to what you wanted.  You can see the round head but only 3/8" long 4-40, and the oval head 6-32.

Tom Owad's picture
Online
Last seen: 47 min 23 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
The Media Wysiwyg Settings

The Media Wysiwyg Settings module was resetting the format order every time cron ran. I think we're good now.

Log in or register to post comments