Apple IIc turned yellow

29 posts / 0 new
Last post
Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
Apple IIc turned yellow

Hi everyone. I have 2 Apple IIc's. The one I use more or less often and is in my house has maintained its color pretty well. The seond one I have, which was stored in the Attic, inside bubble wrap packaging has turned yellow! How can this happen since it doesn't have any contact with the Sun's rays?

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Heat

heat has yellowed the plastic. Attics are notorious for getting hot.

Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
Thanks, I didin't know that!

Thanks, I didin't know that! I thought it was sun rays! I was keeping my 2nd IIc as a backup collectible, now it looks worse than my daily IIc.

Offline
Last seen: 8 months 3 weeks ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Whitening a //c Case?

There are several threads about whitening a yellowed //c case.  I've never done it, and if you find a method that works for you it would be great if you share it here.

Offline
Last seen: 2 months 1 week ago
Joined: Dec 19 2003 - 14:45
Posts: 219
What do you use your //c for

What do you use your //c for ?

Here's mine when I used to travel with it in the 80s:

Offline
Last seen: 2 months 1 week ago
Joined: Dec 19 2003 - 14:45
Posts: 219
Well, of course, the BMOW

Well, of course, the BMOW Floppy EMU is a recent addition.

Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
I use mine for writing BASIC

I use mine for writing BASIC programs and mostly for reliving my youth. I save programs on disks (its still going strong). I'm also doing some 6502 Assembly lately.

Of course, I also run a few games now and then.

Offline
Last seen: 3 years 2 months ago
Joined: Dec 8 2020 - 11:26
Posts: 6
Im not a pro for apple stuff

Im not a pro for apple stuff - but for nintendo and co -

 

in some versions of the nintendo snes case there is a chemical mixed in to prevent burning. (bromine)

 so these cases yellow very strong even without beiing exposed to sunlight or nicotine.

some people "retrobright" them with a bleach (gel) and plastic foil. most of the time this results in an uneven bleaching and is no good.

 

my technique is easy - just buy a big (really big) bottle of h2o2 ( check out swimmin pool supply) - then on a sunny day you put the case in a clearbox and submerse it completely in the h2o2 and put it in the direct sun for a few hours. it will be shiny new after that - for at least a few years depening on how much of these chemicals are used in the plastic.

 

rgds dario

Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
Thanks!

Thank you for the info!

Offline
Last seen: 14 hours 21 min ago
Joined: Apr 26 2016 - 08:36
Posts: 666
Javier Rivera is the

Javier Rivera is the undisputed master of RetroBrite and his method is foolproof, if followed closely. 

There are other ways to do it, but if you follow his procedure carefully your de-yellowing results will be flawless.

 

https://youtu.be/3Jjh8gC-apY

 

 

Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
Thanks for the link!

Thanks for the link!

Offline
Last seen: 10 months 1 day ago
Joined: Jul 28 2018 - 04:29
Posts: 67
baldrick wrote:Javier Rivera
baldrick wrote:

Javier Rivera is the undisputed master of RetroBrite and his method is foolproof, if followed closely. 

I didn't watch the whole video, yet, but this seems to be a method, where you mix your own cream and retrobright it be puuting the cream on the plastics.

This method is far from being foolproof... if you miss to massage the package regularily you will likely get a very stained result.

 

I recommend submerging the case in a Water-H2O2-Mixture, as the 8-Bit-Guy does in several of his videos.

MacFly's picture
Offline
Last seen: 1 week 6 days ago
Joined: Nov 7 2019 - 13:49
Posts: 442
pcbastler wrote:I recommend
pcbastler wrote:

I recommend submerging the case in a Water-H2O2-Mixture, as the 8-Bit-Guy does in several of his videos.

 

And one of his videos:

https://youtu.be/_GH0ZpaTwqs

Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
I don't understand why there

I don't understand why there isn't a simple paint spray that one can spray the machine while covering the keyboard and some other parts. Wouldn't that be the simplest method?

Online
Last seen: 23 min 49 sec ago
Joined: Jun 6 2020 - 10:50
Posts: 408
Seeker wrote:I don't
Seeker wrote:

I don't understand why there isn't a simple paint spray that one can spray the machine while covering the keyboard and some other parts. Wouldn't that be the simplest method?

 

 

You would need a properly tinted paint for every device out there that yellows.  A //c is a different color than a IIgs, which is a different color than a Super Nintendo, etc.  But they all yellow overtime.  This works on any shade of plastic.  Plus paint can scratch off fairly easily.  And maybe things have gotten better in paint technology over the years, but it used to have a lousy track record for sticking to certain kinds of plastics.

Offline
Last seen: 10 months 1 day ago
Joined: Jul 28 2018 - 04:29
Posts: 67
Seeker wrote:I don't
Seeker wrote:

I don't understand why there isn't a simple paint spray that one can spray the machine while covering the keyboard and some other parts. Wouldn't that be the simplest method?

You can spray paint a II/II+ or IIe easily, in fact I have done this with a clone already, the result was better than I expected. Biggest problem is to find the exact color for the case.

 

Unfortunally you cannot spraypaint a IIc, because there are some markings (Reset, 40/80, ...) printed on the case, which you would have to restore, too. And I do not have any guess, how these things could be  reprinted on the maschine.

Offline
Last seen: 10 months 1 day ago
Joined: Jul 28 2018 - 04:29
Posts: 67
nick3092 wrote:You would need
nick3092 wrote:

You would need a properly tinted paint for every device out there that yellows. 

Well, if you own a IIc Monitor, it is easy to get the original color: just take the painted monitor stand to the hardware store and let them mix the correct color.

 

But as I mentioned above, there is another problem with paintig the case.

Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
pcbastler wrote:nick3092
pcbastler wrote:
nick3092 wrote:

You would need a properly tinted paint for every device out there that yellows. 

Well, if you own a IIc Monitor, it is easy to get the original color: just take the painted monitor stand to the hardware store and let them mix the correct color.

 

But as I mentioned above, there is another problem with paintig t

I have the IIc original little monitor with the stand. It's as yellow as my 2nd IIc. If I only had known about the heat...

Verault's picture
Offline
Last seen: 2 hours 18 min ago
Joined: Dec 21 2017 - 14:19
Posts: 363
First off retrobrighting is

First off retrobrighting is easy. Secondly if you ever sell the machine YOU NEED TO DIVULGE IT WAS PAINTED. Many of us dont want modified/painted computers. I bought a IIgs that someone painted a light shade of yellow! I thought it was just yellowing but he painted the thing that color?!? It took so much work to strip the paint then retrobright the computer and make it look nice. I never ever would have bought it if I knew it was painted. Why? Most people dont know how to paint properly for one thing...

Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
Verault wrote:First off
Verault wrote:

First off retrobrighting is easy. Secondly if you ever sell the machine YOU NEED TO DIVULGE IT WAS PAINTED. Many of us dont want modified/painted computers. I bought a IIgs that someone painted a light shade of yellow! I thought it was just yellowing but he painted the thing that color?!? It took so much work to strip the paint then retrobright the computer and make it look nice. I never ever w

 

I don't think I'll be painting anything, I suck at painting.

In another forum, someone suggested leaving it out in the direct Sunlight to restore some of its original painting. This sounds the opposite of what I should do, but according to one source, its the heat and sunlight coming through windows that causes yellowing, not direct sunlight.

Finally, retrobriting is not that easy in the sense that you have to remove all electronics and keys from the case. So I'll either keep it as is, or try the Sun technique.

Offline
Last seen: 3 years 3 months ago
Joined: Dec 14 2020 - 12:07
Posts: 9
Finally, retrobriting is not

Finally, retrobriting is not that easy in the sense that you have to remove all electronics and keys from the case. So I'll either keep it as is, or try the Sun technique.

 

Not the keys. The keys don't change color (except the spacebar). The keys are made of PBT and that does not contain the bromine that causes the yellowing. If you're taking a IIc, its fairly trivial to take it fully apart. < 15 screws total to get the top, bottom, and rear panel pieces out.

Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
Hmmm, that doesn't sound too

Hmmm, that doesn't sound too difficlut. I thought because it is compact, it would be harder. I'll remove the screws tonight as a first step, thanks.

Offline
Last seen: 3 years 3 months ago
Joined: Dec 14 2020 - 12:07
Posts: 9
Here's two good videos: Apple
Offline
Last seen: 2 years 8 months ago
Joined: Nov 19 2016 - 19:54
Posts: 19
Thanks.

Thanks.

MacFly's picture
Offline
Last seen: 1 week 6 days ago
Joined: Nov 7 2019 - 13:49
Posts: 442
Verault wrote:I bought a IIgs
Verault wrote:

I bought a IIgs that someone painted a light shade of yellow! I thought it was just yellowing but he painted the thing that color?!?

 

You gotta be kidding!! LMAO!

 

Offline
Last seen: 1 year 11 months ago
Joined: Mar 31 2020 - 19:55
Posts: 848
MacFly wrote:Verault wrote:I
MacFly wrote:
Verault wrote:

I bought a IIgs that someone painted a light shade of yellow! I thought it was just yellowing but he painted the thing that color?!?

 

You gotta be kidding!! LMAO!

 

That is indeed, hilarious. I'd chance that the seller thought the same. 

 

Who paints a system urine yellow?! Perhaps they wanted it to match their accessories. 8)

 

My retrobrite-esque tips: You need strong UV to activate these solutions. Go to your local pet store and buy some reptile UV lamps, and use those in and around a glass tank if you can. (I used to have a full lab set-up for this.)

 

Second, do not use a paste. Use a full, submerged, liquid solution in an aquarium, and the UV lamps on all six sides. Suspend it with metal hanger rods that gently touch the inner lips of the case. This allows a uniform distribution of UV light and a uniform distribution of H2o2. Be sure to gently stir the mixture every 12 to 24 hours, and replenish the H2O2 as needed. In my experience, a gentler solution with good UV lighting over a longer period of time works best. 

Tom Owad's picture
Offline
Last seen: 11 hours 48 min ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
Is there anything definitive

Is there anything definitive yet on long term effects? Specifically, whether these treatments weaken the plastic?

Khaibitgfx's picture
Offline
Last seen: 20 hours 59 min ago
Joined: Jun 29 2019 - 20:02
Posts: 135
I keep all vintage computers

I keep all vintage computers including documentation is plastic containers in a very cool and dark room, other than UV Light and heat, moisture or the occasional roaming insect can show up even in places you least suspect.

Offline
Last seen: 14 hours 21 min ago
Joined: Apr 26 2016 - 08:36
Posts: 666
Tom Owad wrote: Is there
Tom Owad wrote:

Is there anything definitive yet on long term effects? Specifically, whether these treatments weaken the plastic?

I've retrobrited dozens of pieces using the paste method for large pieces and the submerged liquid method for small pieces. I haven't been able to "take it too far" and bleach the plastic - this doesn't really happen if you use a good method, nor have any plastics become embrittled, nor have any plastics returned to a yellow state. I've discovered that yellowing takes place in certain atmospheric conditions - I've had components in my posession for decades that haven't yellowed, but some pieces from others' collections have yellowed - the only explanation is that their storage or use conditions are different than mine. In any case, nothing that I've retrobrited has returned to a yellowed state - the oldest retrobriting I have is probably 5 years ago so the timeline isn't all that long... Your mileage may vary.
Log in or register to post comments