G3 powerbook wont boot

4 posts / 0 new
Last post
Offline
Last seen: 19 years 2 months ago
Joined: Oct 6 2004 - 23:08
Posts: 1
G3 powerbook wont boot

Hey guys

This is my first post on here just saying hi.

but i have a powerbook G3 300mhz. I got it off ebay for like 200 shipped and when i go to boot all i get is the disk with a ? in the middle. I even tried booting an OS from disk and it wont even recongize that

any ideas?

Thanks
Night_Kid

coius's picture
Offline
Last seen: 10 years 2 weeks ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
have you tried a current OS

I know one thing about macs. You have to use an Operating System that was recent at the time of the mac being built, or a recent operating system that is still supported. My Pismo (PB G3 FireWire) will not accept anything less than OS 9.1, but will use OS 9.1 and above. (including the most recent version of OS X.) The same thing applies to my iBook G3 900Mhz. The oldest OS I can use is OS X.2.4 (10.2.4). Try os 8.5 or above.

Offline
Last seen: 18 years 4 months ago
Joined: Aug 15 2004 - 19:24
Posts: 359
current os / nonboot G3

even if you use an OS that won't boot it, it will still respond with a dialog box stating same. The laptop in question isn't getting that far. Try zapping the pram. any chance you have an external CD or HD that you can use to test?

Offline
Last seen: 16 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 130
Some newer models that use Op

Some newer models that use OpenFirmware don't tell you if the OS version is wrong. My iMac DV 450+ wouldn't boot from an 8.6 CD but it also wouldn't tell you anything, it would just sit there twiddling it thumbs staring at me. No messages or diagnostic output.

Log in or register to post comments