3.5" Drive question

3 posts / 0 new
Last post
Offline
Last seen: 1 month 6 days ago
Joined: Sep 13 2021 - 12:11
Posts: 26
3.5" Drive question

I just obtained a nice IIGS system which included the A9M0106 drive. The system also included around a dozen 3.5" disks that the seller created...but these are all on DS/HD disks. Can I even use these disks? I thought the A9M0106 was an 800k drive that would only work with DD disks.

Thanks for any help.

Offline
Last seen: 5 hours 34 min ago
Joined: Jun 6 2020 - 10:50
Posts: 407
It may read a HD disk ok, but

It may read a HD disk ok, but it will probably have trouble writing to it for sure. In general though, stick to DSDD. 

Offline
Last seen: 10 hours 11 min ago
Joined: Dec 20 2003 - 10:38
Posts: 570
I stick to DS/DD disks

I stick to DS/DD disks because of bad experiences with HD disks. They generally work but I"ve seen them lose their formatting in sometimes fairly short order.

In one case a friend of mine swore HD disks were fine to use then one night he copied onto a dozen HD disks. Ten of them became unreadable over the  next 12 hours and the rest in the next couple of days.

Log in or register to post comments