I have noticed that a 74LS51 (location C13 on a A2 board) always fails when testing with the TL886II-Plus logic IC test function.
Even if I take one from a working A2 board.
I am using the lastest software version 11.60.
Can anyone here try the same and see what happens?
I found similar irregularities with the original TL866.
Ended up getting rid of it.
I've had pretty good results with my original TL866. However, I don't use the Windows software (don't have Windows), I use an open source one. Also I've never used the chip testing features, I have only used it to program EPROMs, 2716 to 27512.
Hi, what software do you use and which OS?
Thanks,
DDE
The TL866 (and the TL866-II) aren't capable of burning 2716s. They can't do 25V.
How are you doing it? Or are you finding 21V 2716s? They're pretty hard to come by.
I've burned quite a few 2716s, from a couple of makers, ST mostly though.
I run Linux and I use an Open Source programming utility. I don't know if that makes a difference.
Use 27c16 or 27c32. Both need about 12 volts. Problem solved.
I was having trouble with vertical sync on the Apple II and Monitor III I just acquired, so I tested this chip with my TL866II-Plus and I had exactly the same result. The chip worked fine on a breadboard though. So yeah, it's definitely not just you.
As far as burning EPROMs, yes, this programmer only goes up to 18 volts, but usually that works fine anyway, especially if you burn it repeatedly a few times in a row.
There's also this very promising-looking mod: https://www.eevblog.com/forum/blog/eevblog-411-minipro-tl866-universal-programmer-review/msg3946009/#msg3946009
that I plan to do if my pray-and-burn-it-again method starts to fail.
I have since aquired the Retro Chip Tester Pro and it can test the 74LS51 just fine.
[Edited to add: Oops! I didn't catch that this was an old thread. Anyway...]
Have you also updated the firmware in the TL866II?
Are there other types of chips that do test correctly on your 866?
I'm not sure how the factory-supplied software works, but with the open-source MiniPro software that we Mac folks have to use, all of the tests (and expected results) for the various chips are in a couple of xml files. If that's the same with you, you might be able to check to see if there's a bug in the test script itself--and fix it if so.
I was using the newest firmware and software version at the time.
I just looked and there was a newer software version 11.90.
It now has Logic options 7451 and 74LS51, before there was only option 7451.
With most 74LS ICs there is only the 74### without LS and they work fine.
But the new 74LS51 option tests the 74LS51 chip fine.