Apple-1 to Apple II Keyboard Adapter.

4 posts / 0 new
Last post
Macintosh_nik's picture
Offline
Last seen: 8 hours 27 min ago
Joined: Jan 8 2021 - 05:18
Posts: 417
Apple-1 to Apple II Keyboard Adapter.
Hey guys! Does anyone have a gerber file adapter for the Apple II keyboard? I built mine a couple of years ago from what I found in my den, now I want to build a new one. Thanks in advance!
Offline
Last seen: 3 weeks 1 day ago
Joined: Feb 11 2021 - 05:22
Posts: 108
Woud be a nice project to

Woud be a nice project to start learing how to use software that creates Gerber files …

Offline
Last seen: 3 weeks 1 day ago
Joined: Feb 11 2021 - 05:22
Posts: 108
UPDATE: As I want to learn

UPDATE: As I want to learn more abount electronics anyway, I made a schematic for the adapter in question. Would you agree that this is correct? If so, I would have a few PCBs produced. Here is what I got:

 

Macintosh_nik's picture
Offline
Last seen: 8 hours 27 min ago
Joined: Jan 8 2021 - 05:18
Posts: 417
Hi guys!

I made a gerber file of such an adapter. You will also need a 30-40 cm long ribbon cable and a 6x6 mm button like in the link, there are different ones: red, blue, black, and they are not expensive. I haven't tested this gerber since I don't have an Apple II keyboard right now, but I did everything exactly the same way I did a few years ago on a breadboard when I still had such a keyboard. I hope this will be useful to someone.

Log in or register to post comments