Enhanced apple II and it died

8 posts / 0 new
Last post
Offline
Last seen: 3 months 4 weeks ago
Joined: Sep 21 2014 - 01:03
Enhanced apple II and it died

Today I upgraded the ][ with the retro innovations kit. Following ESD procedure. When I turned it on all I get is garbage and no drive activity.
I put the old chips back in and get the same thing. Nice way to start the weekend. Any ideas before it goes back in storage for another 20 years?

NOT FOUND: attached_image_#https://lh3.googleusercontent.com/-x6XJZhQlQis/VDhVR4RHD4I/AAAAAAAAAvg/e7wcSX9va7E/w426-h320/14%2B-%2B1NOT FOUND: attached_image_#

Jordan

gsmcten's picture
Offline
Last seen: 1 week 5 days ago
Joined: Oct 4 2005 - 18:52
Re: Enhanced apple II and it died

jrubin,

Please explain the "Retroinovations Kit".

I've never heard of it.

Steven Smile

Offline
Last seen: 3 months 4 weeks ago
Joined: Sep 21 2014 - 01:03
Re: Enhanced apple II and it died

My mistake, i was looking at the wrong invoice.

I received the kit from ultimateapple2.com

After much troubleshooting I found that the CD / EF or combination of both are bad
the processor and video chip are good. I will have to contact the company.

The apple ii is back up and running , however in ][ not //

gsmcten's picture
Offline
Last seen: 1 week 5 days ago
Joined: Oct 4 2005 - 18:52
Re: Enhanced apple II and it died

Are you talking about the IIe Enhancement Kit?

Offline
Last seen: 3 months 4 weeks ago
Joined: Sep 21 2014 - 01:03
Re: Enhanced apple II and it died

yes

gsmcten's picture
Offline
Last seen: 1 week 5 days ago
Joined: Oct 4 2005 - 18:52
Re: Enhanced apple II and it died

OK. Let me see if I have this right.

You placed an Apple IIe Enhancement Kit in an Apple II?
Is that correct?

Steven Smile

Offline
Last seen: 3 months 4 weeks ago
Joined: Sep 21 2014 - 01:03
Re: Enhanced apple II and it died

No......

Apple //e kit in an Apple ][e

Offline
Last seen: 2 months 2 weeks ago
Joined: May 27 2013 - 13:01
Re: Enhanced apple II and it died

Most people are going to ask you if you're sure the notches on the chips are pointed at the correct side and if there are any bent pins on the chips or if you are sure that the chips are lined up correctly with the sockets.

Log in or register to post comments