Hi, i'm wondering what i should do to fix my iMac G3 DV+, because its been sitting in my attic for years after my switch from mac to windows, and i took it out today, planning to give it to my daughter for homework and webbrowsing, but when i turn it on it just turns on for a few seconds then shuts down. Personally, i think its the flyback, but i don't know for sure if its the flyback or something else. If anybody knows whats happening, please tell me.
Bridged chat on:
Please support the defense of Ukraine.
Direct or via Unclutter App
Active forum topics
No Social Media.
All Content Locally Hosted.
Two Terabytes and Growing.
Built on Free Software.
We have complied with zero government requests for information.
I don't think it'd be the flyback, as that only controls the video, and they should still be functional after 15 years or so. My first idea would be to check the capacitors, especially on the power supply board. This could be causing your issue.
Could be your PAV board (power, analog, video) or a sticking front power button. The reason I mention the power button is DV iMacs had an issue with the power button not being small enough inside its hole. They would actually stick (pushed in) and shut down the iMac once it starts up. Back in 2000 I had my tangerine iMac DV repaired under applecare for this exact reason. AND currently on my work bench I have a tray loader with the exact problem.
That description matches the symptoms of flyback failure, and yes it is a common problem with the CRT-based iMacs.
I'd try to eliminate the easy stuff first, following Maxtek's advice. Depending on your level of skill and experience, that might be as far as you feel comfortable going. You could try opening it up and seeing if there are any obviously burnt or damaged components. Standard warning: there potentially lethal high-voltage safety issues when poking around inside CRT guts.
Yup, its the flyback alright. I checked all the other mentioned components and they all work fine. The flyback smells like its been burned and its a little melted. The PAV board looks fine.
Besides, i'm perfectly comfortable working around CRT's because i used to repair CRT tv's back in the day, and managed to never get zapped by the CRT.
...And i think it's the flyback because the Video neck board basically allows 5v trickle to go to the logic board if the CRT's getting power, etc. But it blocks the 5v trickle if the CRT won't power on (e.g, the Flyback is broken), so the iMac shuts down after a few seconds if it doesnt get the 5v trickle. I think.